Oops, a few air bubles on aft mount reinforcemelay-up, drilled holes, filled with Aeropoxy, plugged with dry flox and Peel-Ply
Date: 11/30/2013
Views: 3666
IMG_6282post
Date: 08/09/2009
Views: 2646
Newest Image
EAA SITE
Date: 08/23/2023
Views: 99826
Most Viewed Image
Wing fillet fairing
Date: 05/23/2007
Views: 536292
DoorSupportMod06
Completed the shaping of the lower door struts. Measured and marked the locations for the bushings on all of the struts. Oriented the bushings so that there was 7.5mm from the bottom of the strut to the center of the bushing. Mixed a small batch of Araldite 420 A/B and added milled fiber for strength and body. Bonded the bushing in place and applied a G-clamp to hold them. Used the remaining Araldite mix to make fillet around the bushing