|
IMGA0620
Date: 04/09/2013
Views: 6891
|
|
|
IMGA0635
Rib ready for floxing
Date: 04/14/2013
Views: 6273
|
|
|
IMGA0634
Shimmed for correct washout
Date: 04/14/2013
Views: 6273
|
|
|
IMGA0573
Date: 03/17/2013
Views: 8417
|
|
|
IMGA0811
Flap closeout
Date: 05/14/2013
Views: 7800
|
|
|
IMGA0716
Cracked off the jig, flipped over, and there we go iv got half a wing!!
Date: 04/23/2013
Views: 5783
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 5938
|
|
|
IMGA0657
After repair
Date: 04/17/2013
Views: 6344
|
|
|
IMGA1030
Wing tips prepped for shaping thanks to Tony K's web blog on his kit #272
Date: 08/08/2013
Views: 6492
|
|
|
IMGA0800
all that work then you have to cut a big chunk out!!
Date: 05/13/2013
Views: 6117
|
|
|
IMGA0661
Screws through ribs to align blocks.....must remember to remove them before the lay up
Date: 04/17/2013
Views: 5375
|
|
|
IMGA0707
The next day me and my helper Ang did the other wing. This time it only took 6 and half hours so left us time to trim the other wing
Date: 04/21/2013
Views: 6022
|
|
|
IMGA0732
The other rear blocks, laying up the ribs and including the mounting plates for the flap hinges.
Date: 04/25/2013
Views: 5740
|
|
|
IMGA0585
Date: 03/18/2013
Views: 8931
|
|
|
IMGA0624
Date: 04/11/2013
Views: 6997
|
|
|
IMGA0626
Hole ready for stall warner
Date: 04/11/2013
Views: 6620
|
|
|
IMGA0756
Some dry micro to stick the block to the spar
Date: 05/05/2013
Views: 5705
|
|
|
IMGA0664
Scrap bit of foam which will get sanded to match the profile of the block. It takes up the gap between spar and end of the block
Date: 04/17/2013
Views: 6041
|
|
|
IMGA0589
Date: 03/29/2013
Views: 9424
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 5856
|
|