|
DSC00219
bracket installed
Date: 09/09/2015
Views: 8621
|
|
|
DSC00157
Instructions state that rod should be reamed to 0.375" but it needed to be reamed out 0.428" to fit push rod.
Date: 09/03/2015
Views: 7269
|
|
|
IMG_0391
Date: 04/10/2015
Views: 7476
|
|
|
IMG_0390
Date: 04/10/2015
Views: 7378
|
|
|
IMG_0231
Date: 01/31/2014
Views: 8474
|
|
|
DSC00214
blue foam placed in rudder to fill void
Date: 09/08/2015
Views: 8611
|
|
|
DSC00228
Had to remove more of the rudder than I wanted so build up rudder trailing edge by attaching peel ply to the outside of the rudder and build up trailing edge using flox around the edge and an initial 2 ply of bid. i'll apply an additional 2 ply after the
Date: 09/10/2015
Views: 6972
|
|
|
IMG_0392
Date: 04/10/2015
Views: 7261
|
|
|
IMG_0406
Date: 04/17/2015
Views: 7713
|
|
|
Rivets
Next problem. Once the push rod end was fitted and drilled according to the manual the rivets provided were too short to go through the whole structure. Awaiting a response from Europa
Date: 09/03/2015
Views: 7272
|
|
|
DSC00153
Lathe installed
Date: 09/01/2015
Views: 8901
|
|
|
DSC00229
Still some work to do but happy so far.
Date: 09/10/2015
Views: 10869
|
|
|
IMG_0237
Fuselage in the truck
Date: 02/01/2014
Views: 8194
|
|
|
IMG_0823
Same of port side.
Date: 09/03/2015
Views: 6587
|
|
|
Ipad 039
Concrete base for 20ft x 10ft shed
Date: 03/22/2014
Views: 6677
|
|
|
DSC00149
Winch installed in garage
Date: 09/01/2015
Views: 8986
|
|
|
Torque tube
Took some measurements and sent query to Europa. Response was I required the issue 1 TP38s
Date: 09/03/2015
Views: 4759
|
|
|
DSC00212
Marking position for bracket on rear bulk head
Date: 09/08/2015
Views: 10813
|
|
|
IMG_0409
Date: 04/17/2015
Views: 7488
|
|
|
IMG_0404
Date: 04/17/2015
Views: 8148
|
|