|
IMG_0228
Andy & I having a good breakfast prior to the start of our trip to South Wales
Date: 01/31/2014
Views: 8373
|
|
|
IMG_0410
Date: 04/17/2015
Views: 9367
|
|
|
IMG_0408
Date: 04/17/2015
Views: 7478
|
|
|
IMG_0394
Date: 04/10/2015
Views: 7442
|
|
|
IMG_0187[1]
Started to fit fixtures and fittings
Date: 04/13/2014
Views: 9895
|
|
|
Torque tube
Took some measurements and sent query to Europa. Response was I required the issue 1 TP38s
Date: 09/03/2015
Views: 4719
|
|
|
IMG_0231
Date: 01/31/2014
Views: 8425
|
|
|
IMG_0190[1]
Date: 04/13/2014
Views: 9324
|
|
|
IMG_0414
Date: 04/18/2015
Views: 9037
|
|
|
IMG_0237
Fuselage in the truck
Date: 02/01/2014
Views: 8137
|
|
|
DSC00215
foam removed to make space for the rudder bracket
Date: 09/09/2015
Views: 7724
|
|
|
IMG_0230
Date: 01/31/2014
Views: 7856
|
|
|
DSC00228
Had to remove more of the rudder than I wanted so build up rudder trailing edge by attaching peel ply to the outside of the rudder and build up trailing edge using flox around the edge and an initial 2 ply of bid. i'll apply an additional 2 ply after the
Date: 09/10/2015
Views: 6910
|
|
|
IMG_0417
Date: 04/22/2015
Views: 7933
|
|
|
IMG_0821
Trial fitted the torque tube but it looks like the TP38 bearing is too short!
Date: 09/03/2015
Views: 6459
|
|
|
DSC00155
As you can see the Issue 1 Bearings are considerably longer and will require shortening once I have the correct dimensions.
Date: 09/03/2015
Views: 6577
|
|
|
Ipad 041
Shed Under construction
Date: 03/27/2014
Views: 7363
|
|
|
IMG_0391
Date: 04/10/2015
Views: 7430
|
|
|
DSC00157
Instructions state that rod should be reamed to 0.375" but it needed to be reamed out 0.428" to fit push rod.
Date: 09/03/2015
Views: 7202
|
|
|
DSC00158
Date: 09/03/2015
Views: 10574
|
|