|
DSCN6117Ann
Date: 06/14/2007
Views: 2818
|
|
|
DSCN4668small
Date: 08/27/2006
Views: 3084
|
|
|
IMG_6967post
Starboard side juncture of main beam with cross beam.
Date: 12/27/2009
Views: 2549
|
|
|
DSCN6097Ann
Date: 06/13/2007
Views: 3013
|
|
|
Condition Inspection P3 T
Date: 02/04/2010
Views: 2920
|
|
|
IntercoolerKit01
Date: 12/08/2004
Views: 3894
|
|
|
MDO_Aircraft_P2
Date: 10/18/2009
Views: 3411
|
|
|
2ndAlternator01small
Date: 03/31/2005
Views: 3666
|
|
|
IMG_7430post
This is the way the new fuel pump and fuel pressure regulator arrived.
Date: 03/15/2010
Views: 3811
|
|
|
IMG_9561ann
Overview. Flip the fuel pressure regulator, add firesleeve and put in the AN6-6 nipple to connect the input hose to the input fuel flow meter and the installation will be complete. Maybe later this week when all the bits for the brake and fuel line come
Date: 06/06/2010
Views: 3039
|
|
|
IMG_7428post
My new banjo hose end for the brake arrived today. Good work Merlin Motor Sports.
Date: 03/15/2010
Views: 2560
|
|
|
Plexi00small
Date: 04/04/2005
Views: 2851
|
|
|
P4141326
Date: 04/16/2006
Views: 3655
|
|
|
DSC04015_Large_post
Date: 10/19/2009
Views: 3180
|
|
|
IMG_7530ann
First try was just to bolt the BSPP banjo onto the brake. Needless to say, that was just too simple to work. It wouldn't seat properly in the BSPT brake.
Date: 04/18/2010
Views: 2688
|
|
|
IMG_7560Ann
Dan at Billet sent a couple AN-6 adaptors to replace the hose barbs.
Date: 04/30/2010
Views: 2889
|
|
|
IMG_7378ann
2010 03 07 - Spent Saturday working on the new brake master cylinder from MDO in France. I have it about 75% installed. Ran into some hardware issues which are shown in later pics. This pic is an overview of the new master cylinder installed on the con
Date: 03/07/2010
Views: 2761
|
|
|
IMG_0912post
After much flailing about which shall not be documented here, I went back to the double puck brake and spent a couple days trying to bleed the new system. Without much luck. I called Robby at Grove Aircraft and he pointed out that if there were any high
Date: 07/01/2010
Views: 2924
|
|
|
IMG_0916post
Safety wired the bolts and check the installation. Pushed the aircraft and the brake stopped it. Held the brake and tried to push it aircraft. It wouldn't budge. Very good. Pulled it out of the hanger, started it up, let it warm properly and taxi tes
Date: 07/01/2010
Views: 4644
|
|
|
Plexi02small
Date: 04/04/2005
Views: 4950
|
|