|
Urear
Date: 04/16/2006
Views: 3717
|
|
|
IMG_2863Ann
Date: 12/06/2008
Views: 3380
|
|
|
Ufront
Date: 04/16/2006
Views: 3664
|
|
|
SideClosed
Date: 07/09/2003
Views: 4366
|
|
|
DSCN6120Ann
Date: 06/14/2007
Views: 2575
|
|
|
IMG_7382ann
The problem... The AN816 provided with the brake does not properly fit the threaded hole in the brake slave cylinder. It will screw in about two threads and that's all. You can see that the 90 degree hose end also sticks up in a big loop just waiting f
Date: 03/07/2010
Views: 3462
|
|
|
IMG_7270post
Date: 02/21/2010
Views: 3276
|
|
|
IMG_6679Ann
Date: 02/15/2008
Views: 4141
|
|
|
DSCN6092Ann
Date: 06/12/2007
Views: 3255
|
|
|
Intercooler06
Date: 01/07/2006
Views: 3566
|
|
|
EuropaCheckListBack
Date: 12/06/2008
Views: 3278
|
|
|
IMG_9536ann
Date: 06/03/2010
Views: 2831
|
|
|
IMG_2858
Date: 12/03/2008
Views: 3063
|
|
|
DSCN4668small
Date: 08/27/2006
Views: 3084
|
|
|
IMG_0047post
Walked down to the corner of the hanger to the next line of hangers where there is a WC. This is what I saw to the Southeast. Not looking good. Went to the WC and cleaned up. Looked even more threatening after the wash. Decided to close up and go hom
Date: 07/08/2010
Views: 2881
|
|
|
Intercooler05
Date: 01/07/2006
Views: 3585
|
|
|
IMG_1195ann
Date: 05/31/2010
Views: 2879
|
|
|
IMG_0045post
Put a bit of fluid in the reservoir and observe bubbles. Air is being pushed out and replaced by fluid. That's good. Watched this for almost an hour till the bubbles stopped and the reservoir began to fill. Shut the bleed contraption, stuff the line b
Date: 07/08/2010
Views: 3299
|
|
|
IMG_1086ann
Back in early April I attempted to bolt the new Billet Pump onto the gearbox. Problem #1 - It didn't fit the boss on the gearbox. It hit a raised area at the edge of the boss.
Date: 04/03/2010
Views: 2959
|
|
|
DSC04012_Large_post
Date: 10/19/2009
Views: 3445
|
|