|
p1000711
p1000711.jpg
Date: 03/12/2012
Views: 5471
|
|
|
dsc09034
Starboard side done. Pic taken before a little clean up.
Date: 01/22/2013
Views: 6497
|
|
|
dsc08634
OK now that the plane is off the trailer and on its own wheel we were able to remove most of the trailer hardware and position the ribs. We also used the main bolts to hold the first rib in place. The other rib was left a little lower to be located once
Date: 04/15/2012
Views: 6344
|
|
|
dsc09038
To make our backs happy and life 1000% easier we tilted the fuselage. Notice I used my monowheel trailer as a jig. A tow strap 4" wide was used in the rear to hold the tail. This was rock solid.
Date: 01/23/2013
Views: 7575
|
|
|
nex_2014_01_12_02
Rat's tail rasp works great here.
Date: 01/13/2014
Views: 5965
|
|
|
p1000634
p1000634.jpg
Date: 02/14/2012
Views: 6107
|
|
|
20141102_154504
Cut old fuel lines. Gona have to replace them anyways. Now I just need to remove the stop block where the gear handle went.
Date: 11/02/2014
Views: 13397
|
|
|
nex_2014_01_12_05
Port side top.
Date: 01/13/2014
Views: 6006
|
|
|
dsc08617
After removing the green tape.
Date: 04/14/2012
Views: 53456
|
|
|
dsc09063
Hey Bill!
Date: 01/24/2013
Views: 6949
|
|
|
nex_2013_08_24_01
Stb. side ribs 3 and 4 epibond in place with the 3 layups on all sides. At this point I was getting faster at doing layups however I only did one side at a time.
Date: 08/25/2013
Views: 6342
|
|
|
dsc09047
I took cardboard and bent it around the socket and overlapped per the manual. Then took this cardboard and made a new template for cutouts. This made the layups go really quick.
Date: 01/23/2013
Views: 7241
|
|
|
2012-08-18_19-58-42_666
Port side. Same area as before just without the flash. Backlit from the inside to show areas with less material. This is before I did the belly layup per the manual.
Date: 08/19/2012
Views: 10140
|
|
|
dsc08629
In a few mins she will no longer be a monowheel :-(
Date: 04/14/2012
Views: 6881
|
|
|
p1000696
p1000696.jpg
Date: 03/12/2012
Views: 5636
|
|
|
p1000722
p1000722.jpg
Date: 03/12/2012
Views: 5834
|
|
|
p1000615
p1000615.jpg
Date: 01/29/2012
Views: 8551
|
|
|
dsc09041
Port side guides being placed for layup.
Date: 01/23/2013
Views: 7299
|
|
|
p1000727
p1000727.jpg
Date: 03/12/2012
Views: 5524
|
|
|
dsc08639
More of the same. I was going to cut the carpet and form it to the ribs and staple it in place but decided that was just a time vampire and pointless since the airframe is holding it in place.
Date: 04/15/2012
Views: 6655
|
|