|
DSCN5727Ann
Date: 04/08/2007
Views: 3125
|
|
|
IMG_2276
Date: 03/01/2005
Views: 3140
|
|
|
IMG_5650Ann
Date: 09/28/2007
Views: 3723
|
|
|
DSC08800
starboard side
Date: 06/05/2012
Views: 8567
|
|
|
CH18_19
Date: 12/31/1969
Views: 8653
|
|
|
IMG_0457ann
2010 10 20 While in Florida, I had Bud go over the aircraft to see what issues he could find. One issue was the lack of spar pin reinforcements when the cockpit module was built.
Date: 10/20/2010
Views: 2641
|
|
|
DSCN3229
Date: 12/31/1969
Views: 2378
|
|
|
01052003204623_G
Date: 12/31/1969
Views: 2596
|
|
|
07102008198_G
Date: 09/04/2009
Views: 4308
|
|
|
Primative Pete
Date: 12/04/2007
Views: 4010
|
|
|
IMG_7679Ann
Date: 04/27/2008
Views: 2729
|
|
|
Port aft spacer is thinner than front.
Date: 10/12/2009
Views: 2711
|
|
|
tank_breather_fuel_filler_installation_copy
Date: 12/31/1969
Views: 3878
|
|
|
dsc08661
Locating the center of the main gear hole. Used a pilot to be used to measure out the 10“ diameter on the bottom.
Date: 04/22/2012
Views: 10492
|
|
|
IMG_7366
Applying the fiberglass/epoxy strips to the port side. Plastic wrap to prevent the epoxy from bonding to the tools used to hold the strip in place.
Date: 02/22/2014
Views: 5297
|
|
|
Classic 912 FWF Ian.
Date: 09/02/2010
Views: 1701
|
|
|
A040203_Engine_2
Date: 12/31/1969
Views: 2433
|
|
|
Oil_Cooler_Hot_Air_Collector_Manifold
Date: 12/31/1969
Views: 4363
|
|
|
Fuel_system_16
Date: 07/01/2007
Views: 3735
|
|
|
DSCN6245
Date: 10/11/2009
Views: 3380
|
|