|
CH23_25
Date: 10/01/2005
Views: 2931
|
|
|
Panel population 9.
Date: 03/01/2010
Views: 2365
|
|
|
DSCN6342
Date: 10/11/2009
Views: 2554
|
|
|
FuelDrainValvePort01
Date: 09/29/2003
Views: 7796
|
|
|
IMG_2688
Cut away excess material on the sides of the angle. Will probably cut away more excess material from the base part of the angle.
Date: 04/09/2012
Views: 3075
|
|
|
IMG_1138
Date: 08/30/2007
Views: 2635
|
|
|
Bild_012_1
Date: 08/22/2008
Views: 3123
|
|
|
IMG_7942Ann
Date: 06/28/2008
Views: 2580
|
|
|
p1000730
p1000730.jpg
Date: 03/12/2012
Views: 5447
|
|
|
IMG_2172
Date: 01/03/2005
Views: 2533
|
|
|
IMGA1057
And a few hours later.......
Date: 08/09/2013
Views: 5933
|
|
|
DSCF0614
Date: 07/25/2003
Views: 3364
|
|
|
Baggage_Area_08_002
Date: 05/19/2008
Views: 3318
|
|
|
CH14_9
Date: 12/31/1969
Views: 7410
|
|
|
dsc09018
Started to make the axle jig. Used a simple setup of first taking large flat blocks of wood and caulking it to the floor somewhere over FS70. Then that allows me to fix the aluminum angle with a single screw once in its final position.
Date: 01/10/2013
Views: 8188
|
|
|
N4211W wing rigging 21.
Date: 10/09/2010
Views: 2604
|
|
|
11072002125450_G
Date: 12/31/1969
Views: 2878
|
|
|
IMG_0811
Flew the aircraft once around the pattern and checked for leaks again. Nothing. Went back out and flew circuits for a bit more than an hour. Very rusty on the landings. Need a couple more hours of practice. Still, it's good to be flying again!
Date: 01/01/2010
Views: 2589
|
|
|
Sternpost09Ann
Date: 06/14/2004
Views: 2421
|
|
|
IMG_0830
Date: 11/17/2005
Views: 3259
|
|