|
MassBalanceUpperStop
Date: 02/22/2004
Views: 2265
|
|
|
Example of slightly under center - bad.
Date: 06/12/2011
Views: 3347
|
|
|
Baggage_Area_26
Date: 06/03/2007
Views: 2493
|
|
|
80_Standpipe
Date: 12/31/1969
Views: 2577
|
|
|
DSCN3942
Date: 09/30/2005
Views: 2660
|
|
|
N4211W wing rigging 11.
Date: 10/09/2010
Views: 2602
|
|
|
CH18_11
Date: 12/31/1969
Views: 2693
|
|
|
577899059
Passed Inspection. Now for me to get current and tailwheel endorsement
Date: 06/05/2019
Views: 175635
|
|
|
Ceiling camera for cockpit
Date: 03/24/2009
Views: 2678
|
|
|
Wing 3.
Date: 08/28/2009
Views: 2351
|
|
|
DSCN5439
Date: 07/20/2009
Views: 2814
|
|
|
Rudder_stops_5
Date: 05/26/2009
Views: 3025
|
|
|
IMG_0457ann
2010 10 20 While in Florida, I had Bud go over the aircraft to see what issues he could find. One issue was the lack of spar pin reinforcements when the cockpit module was built.
Date: 10/20/2010
Views: 2595
|
|
|
Mass balance bumper.
Date: 05/05/2009
Views: 2905
|
|
|
CBM - 10T - FUSELAGE INTRO TRIGEAR
Date: 11/18/2013
Views: 1477
|
|
|
dsc09064
Bill does nice peel ply work!
Date: 01/24/2013
Views: 7032
|
|
|
21082003203400_G
Date: 12/31/1969
Views: 2449
|
|
|
DoorMount08Ann
Date: 07/04/2004
Views: 2228
|
|
|
IMG_9571post
The fuel lines were tied with tie-wraps and 1/2" (12.7 mm) rubber fuel hose lengths. The vent hose was tied in as well by running it through short lengths of fuel hose and using tie-wraps to hold the rubber hose and protect the vent line from chafin
Date: 06/12/2010
Views: 3682
|
|
|
DSCN6089Ann
Date: 06/12/2007
Views: 3247
|
|