|
IM003543
Date: 11/13/2007
Views: 3741
|
|
|
Port aft gone!
Date: 10/08/2009
Views: 2405
|
|
|
MG_2974
Date: 03/17/2008
Views: 2435
|
|
|
dsc09036
Rib one port side again used around 112g of 420 cured at 78f for 12 hours.
Date: 01/23/2013
Views: 7089
|
|
|
Michael Grass Cessna 150 (152?) background (20%).
Date: 09/18/2010
Views: 3086
|
|
|
DSCN6607
Date: 10/25/2009
Views: 1889
|
|
|
A Flap Push-Rod is not going to work post Mod 78
Date: 11/27/2013
Views: 2872
|
|
|
IMG_7382ann
The problem... The AN816 provided with the brake does not properly fit the threaded hole in the brake slave cylinder. It will screw in about two threads and that's all. You can see that the 90 degree hose end also sticks up in a big loop just waiting f
Date: 03/07/2010
Views: 3463
|
|
|
IMG_0517
Date: 10/14/2008
Views: 3918
|
|
|
KZ_rally_2009
Date: 06/13/2009
Views: 3337
|
|
|
IMGA0952
Finally done. 6 months start to finish
Date: 09/11/2017
Views: 40725
|
|
|
38_Primer_parts
Date: 12/31/1969
Views: 2221
|
|
|
IMG_6685Ann
Date: 02/15/2008
Views: 3530
|
|
|
IntercoolerFig2
Date: 01/07/2006
Views: 3023
|
|
|
122_2232_IMG
Date: 01/28/2005
Views: 2831
|
|
|
09Port_Upper_with_Flap_down
Date: 12/31/1969
Views: 2751
|
|
|
IMG_5615
Date: 10/28/2013
Views: 5227
|
|
|
IM003597
Date: 11/18/2007
Views: 3538
|
|
|
IMG_7429post
Here's a closeup of the hose end, bolt and washers. The hose end connector is identical to that which was on the master cylinder end so this should easily replace the 90 degree AN hose end provided. We'll know better later this week when I can get to th
Date: 03/15/2010
Views: 2484
|
|
|
DSC00163
Rudder opened up to accept the push rod bracket. Alas no blue foam as it is the NG model. No instructions on how to proceed. Advice from Europa is to bod in some blue foam is it is not load bearing and is just a bed for the composite.
Date: 09/04/2015
Views: 8822
|
|