|
Snow 1
Date: 12/21/2009
Views: 2748
|
|
|
Hard shot to get but pin just about to enter striker.
Date: 12/12/2009
Views: 3518
|
|
|
Kept drilling with larger and larger bit, making adjustments along the way.
Date: 12/12/2009
Views: 2936
|
|
|
Pin will get welded to a .080" thick plate and have 2 screws holding it in place.
Date: 12/12/2009
Views: 4470
|
|
|
Lower door anti-bulge 11.
Date: 12/12/2009
Views: 3211
|
|
|
Striker
Date: 12/12/2009
Views: 2646
|
|
|
Started at .125" hole and working up to .1875"
Date: 12/12/2009
Views: 3130
|
|
|
Striker clears strut in opened position no problem.
Date: 12/12/2009
Views: 2823
|
|
|
Striker drilled 6 degrees from neutral.
Date: 12/12/2009
Views: 3298
|
|
|
Less messy compared to modeling clay 2.
Date: 12/12/2009
Views: 3154
|
|
|
Less messy compared to modeling clay 1.
Date: 12/11/2009
Views: 2687
|
|
|
Pin and striker ready for a test.
Date: 12/12/2009
Views: 2700
|
|
|
Door isn't closed all the way, contact area is low and inboard.
Date: 12/12/2009
Views: 2724
|
|
|
Targeting where pin needs to be 1.
Date: 12/12/2009
Views: 2602
|
|
|
Targeting where pin needs to be 2.
Date: 12/12/2009
Views: 2410
|
|
|
Pin and striker upper aft 2.
Date: 12/11/2009
Views: 2678
|
|
|
Pin and striker upper aft 1.
Date: 12/11/2009
Views: 2854
|
|
|
Outboard strut anchor 2.
Date: 12/01/2009
Views: 2436
|
|
|
Lower door anti-bulge 12.
Date: 12/01/2009
Views: 2789
|
|
|
Lower door anti-bulge 13.
Date: 12/01/2009
Views: 2616
|
|