|
New MC-4A 08
With the mounting holes drilled and the sides cut away the brackets are attached to the mount.
Date: 04/15/2012
Views: 2528
|
|
|
New MC-4A 09
The MC-4A's with brake levers are assembled and positioned to allow the location for the aft holes to be established.
Date: 04/15/2012
Views: 3184
|
|
|
New MC-4A 03
2012004 15 - In order to get the new MC-4A's to fit within the available space, the threaded end has to be shortened so that when the attach fitting is screwed on fully, there will be not threaded end protruding into the attach fitting. Removing this muc
Date: 04/12/2012
Views: 2474
|
|
|
New MC-4A02
And it's too wide to fit in between the mounts. I have 1 1/4 x 1 1/4 x 1/8 Al angle on order to fix the width problem and I think I know how to fix the length problem as well. Then I can address the height issue...
Date: 04/11/2012
Views: 2575
|
|
|
New MC-4A01
2012 04 12 - Well, didn't take very long today to decide the new brake assembly wouldn't fit. It's too long.
Date: 04/11/2012
Views: 2809
|
|
|
IMG_2706
Assembled everything. You can see the spacers fit to hold the master cylinders in alignment. Plumbing in place. The unit is about 1 1/2 in. taller than the old Jaymar. I'm wondering if it will fit or will I have to lower it in the mount? We'll see to
Date: 04/11/2012
Views: 3321
|
|
|
IMG_2703
2012 04 11 - Bits arrived today. Relocated (lower) the holes for the bolt which will hold the aft ends of the master cylinders. Also removed more metal from the brackets.
Date: 04/11/2012
Views: 3035
|
|
|
IMG_2683
Here are the new MATCO master cylinders connected to the old levers sitting on the old base. Now how do we contain the back ends to make this work?
Date: 04/07/2012
Views: 2620
|
|
|
IMG_2685
I elected to make up a support structure from some 12" 1 1/2 x 1 1/2 wide aluminum angle i had in my aluminum bin. Cut two lengths 5 1/2" long and clamped them to the base well centered and drilled out holes matching the base. Attached them t
Date: 04/09/2012
Views: 2701
|
|
|
IMG_2688
Cut away excess material on the sides of the angle. Will probably cut away more excess material from the base part of the angle.
Date: 04/09/2012
Views: 3028
|
|
|
IMG_2692
The longest AN3-30 bolt I had was too short so a longer bolt is on order as are aluminum spacers to maintain proper alignment of the ends of the MCs.
Date: 04/09/2012
Views: 2726
|
|
|
IMG_2681
2012 04 09 Well, after 4 weeks and buckets of DOT5 spent trying to make the Jaymar master cylinders work I have given up. They are just crap. So I'm taking the base of their base and building a new brake master setup using MATCO MC-4A master cylinders.
Date: 04/07/2012
Views: 3088
|
|
|
Stbd Flap Bracket 2
Starboard outboard flap bracket assembled. That iPad has become an essential piece of equipment. I have all the Europa build manuals, all the Rotax maintenance manuals, Europa owners manual, Rotax owners manual right there. Also have a number of aviati
Date: 06/28/2011
Views: 2978
|
|
|
Port Flap Bracket 1
Port outboard flap bracket completed
Date: 06/29/2011
Views: 2476
|
|
|
Port Flap Bracket 2
Another view.
Date: 06/29/2011
Views: 2717
|
|
|
Wings ready to go
Fully assembled wings ready to go back on the aircraft.
Date: 06/29/2011
Views: 2629
|
|
|
Wings on 1
Tommy and Russ stopped by to help me put the wings back on.
Date: 07/01/2011
Views: 2743
|
|
|
Wings on 2
Went pretty well with three folks working on it.
Date: 07/01/2011
Views: 2704
|
|
|
Wings on 3
Just had to get all the pitot/static lines and wing lighting wiring tucked into the wing root properly or they don't fit.
Date: 07/01/2011
Views: 3195
|
|
|
Flap Mark Test Up
Started the application of the flap position marking with a printer copy to test for proper placement.
Date: 07/01/2011
Views: 2857
|
|