|
nex_2014_01_25_28
Wings on. Not really required at the stage. Just had to do it for motivation.
Date: 01/26/2014
Views: 6217
|
|
|
nex_2014_01_25_01
Starboard side after Uni over ribs 3 and 4. Added Bid on the X to reinforce the cuts needed to get the Uni to lay flat. Also filled in Rib 1 air buble.
Date: 01/25/2014
Views: 5988
|
|
|
nex_2013_08_24_06
Time for some clean up.
Date: 08/25/2013
Views: 6103
|
|
|
nex_2014_01_12_01
Bolt hole for LG port side filed to size.
Date: 01/13/2014
Views: 5976
|
|
|
nex_2014_01_12_02
Rat's tail rasp works great here.
Date: 01/13/2014
Views: 5958
|
|
|
nex_2014_01_12_04
Port LG in place with bolt in.
Date: 01/13/2014
Views: 5941
|
|
|
nex_2014_01_12_05
Port side top.
Date: 01/13/2014
Views: 6002
|
|
|
nex_2014_01_12_06
She's got a leg!
Date: 01/13/2014
Views: 6094
|
|
|
nex_2014_01_12_07
Port side.
Date: 01/13/2014
Views: 6155
|
|
|
nex_2013_08_24_01
Stb. side ribs 3 and 4 epibond in place with the 3 layups on all sides. At this point I was getting faster at doing layups however I only did one side at a time.
Date: 08/25/2013
Views: 6338
|
|
|
nex_2013_08_24_02
nex_2013_08_24_02.jpg
Date: 08/25/2013
Views: 5884
|
|
|
nex_2013_08_24_03
nex_2013_08_24_03.jpg
Date: 08/25/2013
Views: 5812
|
|
|
nex_2013_08_24_04
As you see here the port side is done with rib 3 and 4. I didn't have photos of doing the layups.
Date: 08/25/2013
Views: 6100
|
|
|
dsc09068
Seeing how ribs 2,3,4 line up. Get a belt sander 4x36, you'll be glad you did. Mine is from Harbor Freight.
Date: 01/25/2013
Views: 8031
|
|
|
dsc09069
Rib 2 stbd side.
Date: 01/25/2013
Views: 7538
|
|
|
dsc09070
While the layups are curing we stared work on the axles. Had to ream out the holes forMG02.
Date: 01/25/2013
Views: 7067
|
|
|
dsc09071
Uncle Kim glassing in Rib 2.
Date: 01/26/2013
Views: 6780
|
|
|
dsc09072
Here is a shot of the working angle. This was so much better than leaning over the edge. Kim's idea. Notice the heater behind Kim, this was key to keeping the temps even though the temps outside were in the 40's.
Date: 01/26/2013
Views: 7053
|
|
|
dsc09073
Rib 2 template.
Date: 01/26/2013
Views: 7272
|
|
|
dsc09074
Port side Rib 2 layup.
Date: 01/26/2013
Views: 7703
|
|