Kevin, I TIG welded a couple of 8 AN - 1/2" Tube steel braze fitting adapters to the two barb fittings on top of the oil tank and effectively converted it to tank with AN fittings. The only 'messing around' part was that I had to bore the adapter so that the oil tank barb fitting would slide inside so it could be welded. The fittings came from Pegasus Auto racing and the part number was 3259-08 @ $4.00 If I can find them I'll send you some photographs. Paul ________________________________ From: Kevin Klinefelter To: rotaxengines-list@matronics.com Sent: Sat, November 13, 2010 8:53:08 AM Subject: Re: RotaxEngines-List: Re: 9xx banjo fitting --> RotaxEngines-List message posted by: "Kevin Klinefelter" Hi Jim & Heather, I have seen the Rotax AN8 banjo fitting. But without buying a new style oil tank with AN fittings, I would not have AN on both ends of the hose. My question was about finding a barb style banjo with an angle. Kevin