|
nex_2014_01_12_07
Port side.
Date: 01/13/2014
Views: 7856
|
|
|
Wanted to make a copy of B16 to make the cuts on before I cut the actual B16 part.
Wanted to make a copy of B16 to make the cuts on before I cut the actual B16 part.
Date: 04/03/2016
Views: 14636
|
|
|
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing
Date: 01/22/2013
Views: 9692
|
|
|
p1000691
p1000691.jpg
Date: 03/12/2012
Views: 6219
|
|
|
nex_2014_01_25_28
Wings on. Not really required at the stage. Just had to do it for motivation.
Date: 01/26/2014
Views: 8289
|
|
|
dsc08623
bungee cord removal.
Date: 04/14/2012
Views: 19162
|
|
|
nex_2014_01_25_35
Dont judge me! You know you do it too. Anyways, was trying to see if my weight would cause the nose to come down. As you can see she likes being a tail dragger.
Date: 01/26/2014
Views: 10414
|
|
|
dsc08399
Atempting to remove the mass ballance brace but to only find out later that it is bonded at the top.
Date: 03/25/2012
Views: 9484
|
|
|
p1000720
p1000720.jpg
Date: 03/12/2012
Views: 7210
|
|
|
nex_2014_01_25_03
Port side dirty work. Just test fitting final install with all hardware will be after the legs are painted.
Date: 01/25/2014
Views: 8145
|
|
|
p1000705
p1000705.jpg
Date: 03/12/2012
Views: 6182
|
|
|
Actual part.
Actual part.
Date: 04/03/2016
Views: 14020
|
|
|
dsc09051
Mix it up Kim! FYI I hate this scale from aircraft spruce, it times out in one min if your plugged in or not. I would have to tap the scale while Kim mixed. We were using masks due to being in an enclosed area and I'm very allergic to the hardener (bumm
Date: 01/24/2013
Views: 8992
|
|
|
nex_2014_01_12_02
Rat's tail rasp works great here.
Date: 01/13/2014
Views: 7746
|
|
|
nex_2014_01_25_05
My lovely bride helping us out. Notice the jig is the mono wheel trailer.
Date: 01/25/2014
Views: 8177
|
|
|
Close up of the relief cut.
Close up of the relief cut.
Date: 04/03/2016
Views: 14095
|
|
|
DSC08801
starboard side
Date: 06/05/2012
Views: 10191
|
|
|
dsc08600
Thinking of modifying the mono wheel trailer as a jig to perform the tri-gear conversion.
Date: 04/10/2012
Views: 14465
|
|
|
p1000692
p1000692.jpg
Date: 03/12/2012
Views: 6093
|
|
|
NEX_2013-11-12-37
N111EU at rest.
Date: 11/13/2013
Views: 32675
|
|