|
p1000695
p1000695.jpg
Date: 03/12/2012
Views: 6045
|
|
|
nex_2014_01_12_07
Port side.
Date: 01/13/2014
Views: 7688
|
|
|
dsc08629
In a few mins she will no longer be a monowheel :-(
Date: 04/14/2012
Views: 8663
|
|
|
p1000468
p1000468.jpg
Date: 12/09/2011
Views: 33845
|
|
|
dsc09024
I was really anal about keeping the socket holes tight. This proved to be more work than it was worth and was fighting the tight fit when it came to locating the axles. Do yourself a favor and just make them a little bigger, 1/8 or so. This gap will be
Date: 01/22/2013
Views: 9004
|
|
|
2012-08-18_19-58-15_689
Port side. Red highlighted area shows area with little reinforcement on inside. This is before I did the belly layup per the manual.
Date: 08/19/2012
Views: 11297
|
|
|
dsc09068
Seeing how ribs 2,3,4 line up. Get a belt sander 4x36, you'll be glad you did. Mine is from Harbor Freight.
Date: 01/25/2013
Views: 9757
|
|
|
dsc09039
Port side done after cure.
Date: 01/23/2013
Views: 8986
|
|
|
dsc08628
Nic pic of the plane! If Bill would move his head out of the way! Notice I'm using a bungee cord to hold the doors open.
Date: 04/14/2012
Views: 9208
|
|
|
E2
Date: 10/05/2012
Views: 12446
|
|
|
p1000709
p1000709.jpg
Date: 03/12/2012
Views: 6542
|
|
|
p1000698
p1000698.jpg
Date: 03/12/2012
Views: 7009
|
|
|
dsc09030
Starboard side done.
Date: 01/22/2013
Views: 8958
|
|
|
20141102_161000
template for new firewall.
Date: 11/02/2014
Views: 16530
|
|
|
nex_2013_08_24_01
Stb. side ribs 3 and 4 epibond in place with the 3 layups on all sides. At this point I was getting faster at doing layups however I only did one side at a time.
Date: 08/25/2013
Views: 7876
|
|
|
nex_2013_08_24_03
nex_2013_08_24_03.jpg
Date: 08/25/2013
Views: 7331
|
|
|
nex_2014_01_25_02
Starboard side of the air bubble fix on rib one. Used Flox with aeroboxy as a fillit.
Date: 01/25/2014
Views: 7841
|
|
|
p1000688
p1000688.jpg
Date: 03/12/2012
Views: 6616
|
|
|
dsc09036
Rib one port side again used around 112g of 420 cured at 78f for 12 hours.
Date: 01/23/2013
Views: 8697
|
|
|
dsc09048
Template for the Stbd side. Note, you are not required per the manual to hook over the plywood with bid.
Date: 01/24/2013
Views: 8716
|
|