|
DSCN5547Ann
Date: 02/18/2007
Views: 3330
|
|
|
IMG_1304
Inside fitting
Date: 04/14/2011
Views: 3284
|
|
|
N9855SPanel
Date: 10/15/2004
Views: 3281
|
|
|
IMG_0084post
Date: 09/02/2010
Views: 2941
|
|
|
DSCN5027Ann
Date: 12/10/2006
Views: 2999
|
|
|
IMG_5748post
Date: 08/09/2009
Views: 3402
|
|
|
IMG_1238ann
The vent port was reversed from the original regulator. This one points forward. Had to do some tugging on tubing to get it all arranged. As soon as I have my new brake caliper installed and tested, I'll be ready to start testing the engine.
Date: 06/21/2010
Views: 3558
|
|
|
IMG_5708Ann
Date: 10/21/2007
Views: 3462
|
|
|
IMG_7933Ann
Date: 06/28/2008
Views: 3143
|
|
|
IMG_1277ann
The starboard wheel pant marked with tape to show where to cut.
Date: 03/29/2011
Views: 3457
|
|
|
IMG_7290
Bonded in the foam and cork support for the "ledge" at the front of the tank.
Date: 02/14/2014
Views: 5226
|
|
|
MassBalanceBoxFix03
Date: 10/23/2003
Views: 3178
|
|
|
InstrumentPanel103Ann
Date: 12/26/2005
Views: 2583
|
|
|
DSCN5569Ann
Date: 02/25/2007
Views: 2867
|
|
|
img0231copy
Date: 07/29/2007
Views: 2577
|
|
|
DSCN4810Ann
Date: 11/05/2006
Views: 2923
|
|
|
DSCN5760Ann
Date: 04/20/2007
Views: 3207
|
|
|
DSCN5179
Date: 12/16/2006
Views: 3599
|
|
|
DSCN5235
Date: 11/29/1999
Views: 4859
|
|
|
IMG_7382ann
The problem... The AN816 provided with the brake does not properly fit the threaded hole in the brake slave cylinder. It will screw in about two threads and that's all. You can see that the 90 degree hose end also sticks up in a big loop just waiting f
Date: 03/07/2010
Views: 4100
|
|