|
dsc09064
Bill does nice peel ply work!
Date: 01/24/2013
Views: 8239
|
|
|
dsc08960
Stb side after layups and peel ply removed.
Date: 10/01/2012
Views: 11627
|
|
|
dsc09039
Port side done after cure.
Date: 01/23/2013
Views: 8519
|
|
|
p1000687
p1000687.jpg
Date: 03/12/2012
Views: 6747
|
|
|
dsc09054
Wetting out stbd side.
Date: 01/24/2013
Views: 7811
|
|
|
dsc08625
Cutting out one of the ribs for the airframe. Going to use the mono trailer as the foundation of the jig. This will make is easy to level the airframe when getting ready for the trr-gear conversion. How do you like my work bench?
Date: 04/14/2012
Views: 11492
|
|
|
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing
Date: 01/22/2013
Views: 8944
|
|
|
dsc09041
Port side guides being placed for layup.
Date: 01/23/2013
Views: 8539
|
|
|
20141102_154450
Gear cover removed, now for removing the throttle box. This is all prep work to patch up the mono wheel hole.
Date: 11/02/2014
Views: 16842
|
|
|
dsc09063
Hey Bill!
Date: 01/24/2013
Views: 8118
|
|
|
dsc09023
Ensure you have a good key. I used the drill press to create the dimples. These will be filled with 420 and flox when doing the glass layups.
Date: 01/22/2013
Views: 8463
|
|
|
photo (1)
Bad pic, but shows the end of the reinforcement layups (port side).
Date: 08/20/2012
Views: 12414
|
|
|
dsc08963
Port side. LG socket fitting.
Date: 10/01/2012
Views: 9576
|
|
|
dsc09069
Rib 2 stbd side.
Date: 01/25/2013
Views: 8758
|
|
|
dsc08614
Anybody know a easy way to remove this rust?
Date: 04/10/2012
Views: 9969
|
|
|
p1000715
p1000715.jpg
Date: 03/12/2012
Views: 6666
|
|
|
nex_2013_08_24_01
Stb. side ribs 3 and 4 epibond in place with the 3 layups on all sides. At this point I was getting faster at doing layups however I only did one side at a time.
Date: 08/25/2013
Views: 7437
|
|
|
nex_2014_01_12_06
She's got a leg!
Date: 01/13/2014
Views: 7153
|
|
|
dsc08403
Bill helping me out!
Date: 03/25/2012
Views: 9442
|
|
|
dsc08631
More of the same.
Date: 04/14/2012
Views: 7137
|
|