|
dsc08640
OK not the best shot but here you can see I used the jack to move the rear rib in place under the airframe being careful not to pinch the belly. I then secured the rib in place but using some drywall screws in the 2x6. This way any weight will be transf
Date: 04/15/2012
Views: 7488
|
|
|
IMG_1321
Continuing to fit wheel pants and gear leg fairings. Boring pics so we'll stick with interesting pics. Had to do a reinforcement layup in the wing root to cover the hole needed to access the pitot/static plumbing. That's six plies alternating at 45º.
Date: 04/19/2011
Views: 2947
|
|
|
Bucket clamp 2 of 3.
Date: 08/06/2003
Views: 4571
|
|
|
MG_new_1
Date: 12/31/1969
Views: 4023
|
|
|
LGRubBlockII02
Date: 03/01/2004
Views: 2673
|
|
|
dscn0043
Date: 12/31/1969
Views: 3427
|
|
|
Wing_Dolly_04
Date: 01/28/2006
Views: 3663
|
|
|
Baggage_Area_52
Date: 06/03/2007
Views: 3632
|
|
|
A040203_Engine_2
Date: 12/31/1969
Views: 2627
|
|
|
2005_1_2_23
Date: 02/04/2009
Views: 3172
|
|
|
IMG_0187
Date: 04/14/2005
Views: 2754
|
|
|
DSC04015_Large_post
Date: 10/19/2009
Views: 3619
|
|
|
DSC_0037
Date: 08/31/2007
Views: 3050
|
|
|
DSCN6498
Date: 10/25/2009
Views: 2801
|
|
|
DSCN5762Ann
Date: 04/20/2007
Views: 2680
|
|
|
EGTSensor00Ann
Date: 05/24/2004
Views: 2476
|
|
|
IM003428
Date: 10/31/2007
Views: 5888
|
|
|
IMG_7384ann
The threads on both fittings are 24/in. So that's a match. The issue is one is straight and the other pipe thread.
Date: 03/07/2010
Views: 3076
|
|
|
Mollis_AB_Switzerland_2003
Date: 12/31/1969
Views: 2475
|
|
|
TailWheelMount11
Date: 02/02/2004
Views: 2973
|
|