|
dsc08636
Here is Bill placing in some 2x6's to act as a support for the rear rib. The I-beam is 3 inches wide so the 2x6 fit perfectly. I'll explain later how those come into play.
Date: 04/15/2012
Views: 8305
|
|
|
dsc08967
Little clean up required on Port side.
Date: 10/01/2012
Views: 10488
|
|
|
nex_2014_01_25_07
What a mess.
Date: 01/25/2014
Views: 8233
|
|
|
DSC08800
starboard side
Date: 06/05/2012
Views: 10322
|
|
|
dsc09039
Port side done after cure.
Date: 01/23/2013
Views: 9253
|
|
|
dsc08966
Port side LG socket hole.
Date: 10/01/2012
Views: 11345
|
|
|
nex_2014_01_12_04
Port LG in place with bolt in.
Date: 01/13/2014
Views: 7772
|
|
|
dsc09064
Bill does nice peel ply work!
Date: 01/24/2013
Views: 8965
|
|
|
dsc09058
Wetting out stbd side.
Date: 01/24/2013
Views: 8538
|
|
|
dsc08631
More of the same.
Date: 04/14/2012
Views: 7971
|
|
|
dsc09055
Wetting out stbd side.
Date: 01/24/2013
Views: 8757
|
|
|
dsc09069
Rib 2 stbd side.
Date: 01/25/2013
Views: 9490
|
|
|
dsc09052
Wetting out stbd side.
Date: 01/24/2013
Views: 9322
|
|
|
nex_2014_01_25_04
Bill helping hoist the aircraft up to remove the jig.
Date: 01/25/2014
Views: 8271
|
|
|
dsc08661
Locating the center of the main gear hole. Used a pilot to be used to measure out the 10“ diameter on the bottom.
Date: 04/22/2012
Views: 12731
|
|
|
dsc09063
Hey Bill!
Date: 01/24/2013
Views: 8840
|
|
|
dsc09067
dsc09067.jpg
Date: 01/25/2013
Views: 9066
|
|
|
nex_2014_01_12_02
Rat's tail rasp works great here.
Date: 01/13/2014
Views: 7861
|
|
|
dsc09047
I took cardboard and bent it around the socket and overlapped per the manual. Then took this cardboard and made a new template for cutouts. This made the layups go really quick.
Date: 01/23/2013
Views: 9181
|
|
|
dsc09028
Here the axles are getting the green goop. I used car carnauba wax as a release agent. Worked well jut get it on there thick. We also wrapped the top of the sockets with glad wrap to keep contaminates off of it while we moved it around.
Date: 01/22/2013
Views: 9799
|
|