|
20141102_161000
template for new firewall.
Date: 11/02/2014
Views: 17602
|
|
|
p1000691
p1000691.jpg
Date: 03/12/2012
Views: 6280
|
|
|
p1000706
p1000706.jpg
Date: 03/12/2012
Views: 6190
|
|
|
p1000702
p1000702.jpg
Date: 03/12/2012
Views: 6112
|
|
|
nex_2014_01_12_06
She's got a leg!
Date: 01/13/2014
Views: 8038
|
|
|
DSC08797
Port side
Date: 06/05/2012
Views: 10578
|
|
|
dsc08602
Landing gear parts. The nose gear leg is having MOD 53 performed on it at my fauther in-laws.
Date: 04/10/2012
Views: 10081
|
|
|
dsc08662
The 10“ diameter from the pilot hole.
Date: 04/22/2012
Views: 13382
|
|
|
p1000468
p1000468.jpg
Date: 12/09/2011
Views: 34830
|
|
|
dsc08616
Same here, rust needs to go! Open to ideas.....
Date: 04/10/2012
Views: 7305
|
|
|
dsc08640
OK not the best shot but here you can see I used the jack to move the rear rib in place under the airframe being careful not to pinch the belly. I then secured the rib in place but using some drywall screws in the 2x6. This way any weight will be transf
Date: 04/15/2012
Views: 9113
|
|
|
p1000686
p1000686.jpg
Date: 03/12/2012
Views: 6403
|
|
|
dsc08622
Removed.
Date: 04/14/2012
Views: 18810
|
|
|
p1000692
p1000692.jpg
Date: 03/12/2012
Views: 6150
|
|
|
p1000637
p1000637.jpg
Date: 02/14/2012
Views: 6699
|
|
|
nex_2014_01_25_07
What a mess.
Date: 01/25/2014
Views: 8389
|
|
|
dsc08626
Put in a 2x4 in the main wing spar tunnel and located the pins. This was only used to aid in keeping the plane from tipping.
Date: 04/14/2012
Views: 12587
|
|
|
This is the printer part showing the parts in place.
This is the printer part showing the parts in place.
Date: 04/03/2016
Views: 13902
|
|
|
dsc08966
Port side LG socket hole.
Date: 10/01/2012
Views: 11503
|
|
|
dsc08618
Block and tackle used to hoist the front of the aircraft to aid in creating a jig. This hoist reduces the weight to 25%.
Date: 04/14/2012
Views: 17052
|
|