|
DSCN4668small
Date: 08/27/2006
Views: 3576
|
|
|
Urear
Date: 04/16/2006
Views: 4574
|
|
|
IMG_7378ann
2010 03 07 - Spent Saturday working on the new brake master cylinder from MDO in France. I have it about 75% installed. Ran into some hardware issues which are shown in later pics. This pic is an overview of the new master cylinder installed on the con
Date: 03/07/2010
Views: 3334
|
|
|
DSC04015_Large_post
Date: 10/19/2009
Views: 3758
|
|
|
DSCN6166An
Date: 06/24/2007
Views: 3049
|
|
|
IMG_6787small
Date: 02/23/2008
Views: 3190
|
|
|
6_snaps
Seat cushions installed and snapped into place.
Date: 06/23/2011
Views: 4546
|
|
|
IMG_2854
Date: 12/03/2008
Views: 3387
|
|
|
Condition Inspection P1 T
Date: 02/04/2010
Views: 3204
|
|
|
DSCN6106Ann
Date: 06/13/2007
Views: 3624
|
|
|
Intercooler03
Date: 01/07/2006
Views: 3581
|
|
|
MDO_Aircraft_P1
Date: 10/18/2009
Views: 6747
|
|
|
IMG_1236ann
The new pump is rated at 50 psi output.
Date: 06/21/2010
Views: 3808
|
|
|
IMG_1223ann
2010 06 21 - What's this, the 4th or 5th try at getting a seal on the banjo to the brake caliper? Still leaks.
Date: 06/21/2010
Views: 3467
|
|
|
IMG_6684Ann
Date: 02/15/2008
Views: 3905
|
|
|
IMG_0912post
After much flailing about which shall not be documented here, I went back to the double puck brake and spent a couple days trying to bleed the new system. Without much luck. I called Robby at Grove Aircraft and he pointed out that if there were any high
Date: 07/01/2010
Views: 3588
|
|
|
LongRangeTankStbd
Date: 07/31/2004
Views: 4300
|
|
|
IMG_6968post
Width of tire "well"
Date: 12/27/2009
Views: 3005
|
|
|
IMG_6794post
Starting point for the measurement of the main square beam. Also shows where the tailwheel "U" channel begins.
Date: 12/10/2009
Views: 6458
|
|
|
2ndAlternator01small
Date: 03/31/2005
Views: 4205
|
|