|
nex_2014_01_25_02
Starboard side of the air bubble fix on rib one. Used Flox with aeroboxy as a fillit.
Date: 01/25/2014
Views: 8126
|
|
|
dsc08634
OK now that the plane is off the trailer and on its own wheel we were able to remove most of the trailer hardware and position the ribs. We also used the main bolts to hold the first rib in place. The other rib was left a little lower to be located once
Date: 04/15/2012
Views: 8412
|
|
|
p1000470
p1000470.jpg
Date: 12/09/2011
Views: 11907
|
|
|
p1000697
p1000697.jpg
Date: 03/12/2012
Views: 7067
|
|
|
dsc08602
Landing gear parts. The nose gear leg is having MOD 53 performed on it at my fauther in-laws.
Date: 04/10/2012
Views: 9823
|
|
|
DSC08801
starboard side
Date: 06/05/2012
Views: 10237
|
|
|
nex_2014_01_12_01
Bolt hole for LG port side filed to size.
Date: 01/13/2014
Views: 7731
|
|
|
p1000690
p1000690.jpg
Date: 03/12/2012
Views: 6522
|
|
|
dsc08403
Bill helping me out!
Date: 03/25/2012
Views: 9660
|
|
|
DSC08800
starboard side
Date: 06/05/2012
Views: 10250
|
|
|
dsc08640
OK not the best shot but here you can see I used the jack to move the rear rib in place under the airframe being careful not to pinch the belly. I then secured the rib in place but using some drywall screws in the 2x6. This way any weight will be transf
Date: 04/15/2012
Views: 8885
|
|
|
dsc09066
Port side peel ply removed. Oh notice the caps in the sockets. What I did was take a block of foam and push it down in the socket, then took it back out and covered it with car wax. Once all the ribs are in I'll see how it worked.
Date: 01/25/2013
Views: 9235
|
|
|
DSC08799
Port side
Date: 06/05/2012
Views: 10063
|
|
|
p1000691
p1000691.jpg
Date: 03/12/2012
Views: 6240
|
|
|
dsc09037
Making a template for rib 2. Do yourself a favor and do not use the templates in the manual you will end up waisting your plywood, just make your own.
Date: 01/23/2013
Views: 9256
|
|
|
p1000687
p1000687.jpg
Date: 03/12/2012
Views: 6939
|
|
|
dsc09020
Bill helping by putting a good key on the sockets.
Date: 01/22/2013
Views: 8809
|
|
|
nex_2014_01_25_06
Mains on the ground for the first time.
Date: 01/25/2014
Views: 7992
|
|
|
p1000634
p1000634.jpg
Date: 02/14/2012
Views: 6987
|
|
|
dsc08960
Stb side after layups and peel ply removed.
Date: 10/01/2012
Views: 12314
|
|