|
3_snaps
Went to good old McMaster-Carr and, sure enough, they had multiple options for screw-down snap bases. Ordered these nice stainless steel snap bases with integral 6-32 screw. Used AN970 washers and nylock nuts to hold them on. Nyloc because when I remov
Date: 06/23/2011
Views: 2931
|
|
|
IMG_3334post
Requests to check the fuel delivery system. Started with the gascolator. Any large quantity of crap in the gascolator? Here's the fuel from the gascolator in the test vessel. A tiny bit of black crud from who knows what. But not enough to cause a pro
Date: 06/13/2012
Views: 4138
|
|
|
Stbd Flap Bracket 2
Starboard outboard flap bracket assembled. That iPad has become an essential piece of equipment. I have all the Europa build manuals, all the Rotax maintenance manuals, Europa owners manual, Rotax owners manual right there. Also have a number of aviati
Date: 06/28/2011
Views: 3482
|
|
|
IMG_0824ann
Somewhere along the way, a couple spacers had been lost. Made up new ones. Also put anchor nuts on the radiator mounting flanges to make assembly easier, sorta, kinda. Seems like reassembling this aircraft is more difficult than the original building.
Date: 01/27/2011
Views: 3441
|
|
|
New MC-4A 06
Now the aft ends of the MC-4A's will be within the limits while the brake levers are properly positioned for operation and fit.
Date: 04/12/2012
Views: 2879
|
|
|
IMG_0103post
Date: 09/03/2010
Views: 2967
|
|
|
IMG_1675
End of April. Still fitting wheel pants and gear leg fairings. Here a picture of work on the console cover.
Date: 04/29/2011
Views: 3375
|
|
|
IMG_1591ann
Starting to think about mounting brackets for the wheel pants.
Date: 03/15/2011
Views: 2763
|
|
|
IMG_1590ann
Had to adjust the opening for the brake handles to allow for full and free travel.
Date: 03/15/2011
Views: 4443
|
|
|
IMG_1222ann
2011 03 18 Received my Poly-Flow brake line. It's more flexible than the other stuff. It can be routed to suit. All the brake system needs is the new reservoir and it can be filled/bled.
Date: 03/18/2011
Views: 3115
|
|
|
IMG_0238post
Date: 09/11/2010
Views: 2607
|
|
|
IMG_0247post
Date: 09/13/2010
Views: 2579
|
|
|
IMG_0002post
Date: 08/26/2010
Views: 5878
Keywords:
|
|
|
IMG_1373ann
For the last several days I had been making up a cover for the monowheel hole. Here it's ready for a test fit and any adjustments necessary.
Date: 11/17/2010
Views: 3443
|
|
|
IMG_1415
Continuing work on the brake plumbing. And the usual wheel pants and gear leg fairing work.
Date: 05/28/2011
Views: 3815
|
|
|
IMG_0079post
Date: 09/02/2010
Views: 2782
|
|
|
IMG_1425em
Just kind of a status photo as of 2010 12 20
Date: 12/20/2010
Views: 3336
|
|
|
IMG_3571em_r
Pulled all the pressure hose off again and check for leaks and continuity. All OK, no problems at all.
Date: 08/01/2012
Views: 5915
|
|
|
IMG_3332em
Looks like that plug had been bumped some time during transport. Porcelain shows a crack. OK, replaced ALL the plugs. Engine still didn't run right.
Date: 06/12/2012
Views: 4629
|
|
|
IMG_0011post
Date: 08/30/2010
Views: 5992
|
|