|
dsc08403
Bill helping me out!
Date: 03/25/2012
Views: 9611
|
|
|
dsc09024
I was really anal about keeping the socket holes tight. This proved to be more work than it was worth and was fighting the tight fit when it came to locating the axles. Do yourself a favor and just make them a little bigger, 1/8 or so. This gap will be
Date: 01/22/2013
Views: 9187
|
|
|
dsc08623
bungee cord removal.
Date: 04/14/2012
Views: 19042
|
|
|
dsc09064
Bill does nice peel ply work!
Date: 01/24/2013
Views: 8830
|
|
|
DSC08800
starboard side
Date: 06/05/2012
Views: 10180
|
|
|
20141102_154450
Gear cover removed, now for removing the throttle box. This is all prep work to patch up the mono wheel hole.
Date: 11/02/2014
Views: 17994
|
|
|
p1000630
p1000630.jpg
Date: 02/14/2012
Views: 7379
|
|
|
nex_2014_01_25_05
My lovely bride helping us out. Notice the jig is the mono wheel trailer.
Date: 01/25/2014
Views: 8152
|
|
|
dsc08962
Stb side. Need to do some clean up...
Date: 10/01/2012
Views: 11977
|
|
|
p1000690
p1000690.jpg
Date: 03/12/2012
Views: 6483
|
|
|
dsc09022
Here you see I used bondo on the shims and screwed them down into the block. The shims made sure the guide was level. Also note the hole drilled in the Aluminum angle and the shim. This is where I fixed the guide for the curing stage to ensure nothing
Date: 01/22/2013
Views: 9666
|
|
|
dsc09054
Wetting out stbd side.
Date: 01/24/2013
Views: 8433
|
|
|
p1000722
p1000722.jpg
Date: 03/12/2012
Views: 6844
|
|
|
p1000729
p1000729.jpg
Date: 03/12/2012
Views: 6312
|
|
|
dsc09036
Rib one port side again used around 112g of 420 cured at 78f for 12 hours.
Date: 01/23/2013
Views: 8823
|
|
|
dsc08609
Underside of vents.
Date: 04/10/2012
Views: 13183
|
|
|
p1000728
p1000728.jpg
Date: 03/12/2012
Views: 6503
|
|
|
nex_2014_01_25_06
Mains on the ground for the first time.
Date: 01/25/2014
Views: 7908
|
|
|
dsc08634
OK now that the plane is off the trailer and on its own wheel we were able to remove most of the trailer hardware and position the ribs. We also used the main bolts to hold the first rib in place. The other rib was left a little lower to be located once
Date: 04/15/2012
Views: 8310
|
|
|
p1000697
p1000697.jpg
Date: 03/12/2012
Views: 7016
|
|