|
dsc09058
Wetting out stbd side.
Date: 01/24/2013
Views: 8696
|
|
|
dsc09028
Here the axles are getting the green goop. I used car carnauba wax as a release agent. Worked well jut get it on there thick. We also wrapped the top of the sockets with glad wrap to keep contaminates off of it while we moved it around.
Date: 01/22/2013
Views: 9996
|
|
|
p1000634
p1000634.jpg
Date: 02/14/2012
Views: 7012
|
|
|
dsc09036
Rib one port side again used around 112g of 420 cured at 78f for 12 hours.
Date: 01/23/2013
Views: 9088
|
|
|
nex_2013_08_24_02
nex_2013_08_24_02.jpg
Date: 08/25/2013
Views: 7963
|
|
|
dsc09033
Port side done.
Date: 01/22/2013
Views: 8870
|
|
|
p1000730
p1000730.jpg
Date: 03/12/2012
Views: 6441
|
|
|
dsc09063
Hey Bill!
Date: 01/24/2013
Views: 9022
|
|
|
dsc08602
Landing gear parts. The nose gear leg is having MOD 53 performed on it at my fauther in-laws.
Date: 04/10/2012
Views: 10089
|
|
|
dsc09064
Bill does nice peel ply work!
Date: 01/24/2013
Views: 9132
|
|
|
dsc09067
dsc09067.jpg
Date: 01/25/2013
Views: 9229
|
|
|
nex_2014_01_25_15
Doing mod 59.
Date: 01/25/2014
Views: 8015
|
|
|
p1000469
p1000469.jpg
Date: 12/09/2011
Views: 11205
|
|
|
dsc08619
Roap tied to the engine mount frame to hoist the airframe.
Date: 04/14/2012
Views: 17488
|
|
|
dsc09062
Bill applying peel ply!
Date: 01/24/2013
Views: 9171
|
|
|
dsc09023
Ensure you have a good key. I used the drill press to create the dimples. These will be filled with 420 and flox when doing the glass layups.
Date: 01/22/2013
Views: 9512
|
|
|
dsc08600
Thinking of modifying the mono wheel trailer as a jig to perform the tri-gear conversion.
Date: 04/10/2012
Views: 14769
|
|
|
nex_2014_01_12_05
Port side top.
Date: 01/13/2014
Views: 8103
|
|
|
dsc09061
Applying the layups on stbd side.
Date: 01/24/2013
Views: 9021
|
|
|
dsc09035
Rib one after cure of 420 and peel ply removed. Think we used 112g of 420 here due to the odd angle.
Date: 01/23/2013
Views: 8636
|
|