|
DSC00228
Had to remove more of the rudder than I wanted so build up rudder trailing edge by attaching peel ply to the outside of the rudder and build up trailing edge using flox around the edge and an initial 2 ply of bid. i'll apply an additional 2 ply after the
Date: 09/10/2015
Views: 9432
|
|
|
IMG_0823
Same of port side.
Date: 09/03/2015
Views: 8311
|
|
|
DSC00163
Rudder opened up to accept the push rod bracket. Alas no blue foam as it is the NG model. No instructions on how to proceed. Advice from Europa is to bod in some blue foam is it is not load bearing and is just a bed for the composite.
Date: 09/04/2015
Views: 11863
|
|
|
IMG_0340[1]
cloth cabinet installed.
Date: 09/04/2014
Views: 15230
|
|
|
IMG_0389
Rear Bulk head fixed and peel plyed
Date: 04/10/2015
Views: 9029
|
|
|
IMG_0394
Date: 04/10/2015
Views: 9257
|
|
|
IMG_0417
Date: 04/22/2015
Views: 9980
|
|
|
IMG_0237
Fuselage in the truck
Date: 02/01/2014
Views: 10464
|
|
|
DSC00229
Still some work to do but happy so far.
Date: 09/10/2015
Views: 14550
|
|
|
IMG_0410
Date: 04/17/2015
Views: 11389
|
|
|
Ipad 039
Concrete base for 20ft x 10ft shed
Date: 03/22/2014
Views: 8598
|
|
|
DSC00157
Instructions state that rod should be reamed to 0.375" but it needed to be reamed out 0.428" to fit push rod.
Date: 09/03/2015
Views: 9756
|
|
|
IMG_0235
Date: 02/01/2014
Views: 9954
|
|
|
DSC00219
bracket installed
Date: 09/09/2015
Views: 11731
|
|
|
IMG_0190[1]
Date: 04/13/2014
Views: 12087
|
|
|
DSC00165
Trial fit of the push rod bracket! Doesn't look good. This is going to take some thought.
Date: 09/04/2015
Views: 14533
|
|
|
IMG_0390
Date: 04/10/2015
Views: 9103
|
|
|
IMG_0231
Date: 01/31/2014
Views: 10566
|
|
|
IMG_0191[1]
Date: 09/12/2015
Views: 9783
|
|
|
IMG_0187.JPG (2)
Workshop kitted out. All done in 3 weeks!
Date: 04/13/2014
Views: 11825
|
|