|
Graphics
Looking good
Date: 10/27/2017
Views: 40403
|
|
|
IMGA0588
Date: 03/29/2013
Views: 7437
|
|
|
IMGA0750
Made a tube of bid to carry the pitot tubes from one block to another. This block is where the bell crank sits and the push rod goes to the aileron.
Date: 05/05/2013
Views: 7772
|
|
|
IMAG0227
Date: 10/18/2012
Views: 8063
|
|
|
IMGA0303
Date: 06/11/2015
Views: 9798
|
|
|
IMGA0906
Date: 10/12/2016
Views: 98863
|
|
|
IMGA0610
Date: 08/27/2014
Views: 31435
|
|
|
IMGA0623
Date: 04/09/2013
Views: 8838
|
|
|
IMG_3071
Date: 06/14/2018
Views: 11042
|
|
|
IMGA0893
Date: 09/21/2016
Views: 36779
|
|
|
IMGA0308
Date: 06/11/2015
Views: 9310
|
|
|
IMGA0148
Date: 04/13/2015
Views: 9450
|
|
|
IMGA0707
The next day me and my helper Ang did the other wing. This time it only took 6 and half hours so left us time to trim the other wing
Date: 04/21/2013
Views: 7621
|
|
|
IMGA0716
Cracked off the jig, flipped over, and there we go iv got half a wing!!
Date: 04/23/2013
Views: 7450
|
|
|
IMGA0702
Date: 06/13/2015
Views: 30340
|
|
|
IMGA0716
Date: 07/13/2015
Views: 30351
|
|
|
IMGA1030
Wing tips prepped for shaping thanks to Tony K's web blog on his kit #272
Date: 08/08/2013
Views: 8473
|
|
|
IMGA0854
Date: 08/20/2016
Views: 43850
|
|
|
IMGA0673
Nicely shaped and blended in. The pipe sticking out runs all the way through the blocks and is to carry the wires from the fuselage to the wing tips for nav/strobe and hopefully landing lights
Date: 04/18/2013
Views: 7398
|
|
|
IMGA0661
Screws through ribs to align blocks.....must remember to remove them before the lay up
Date: 04/17/2013
Views: 7050
|
|