Panel is warped on right side, will try some heat.
Date: 01/11/2010
Views: 3817
IMG_1104
Date: 03/17/2004
Views: 4057
Newest Image
EAA SITE
Date: 08/23/2023
Views: 159736
dsc09040
The gap from the bottom of the socket and the belly is as you see. The only way to get it all the way down was to lower the belly to 15" which was not considered an option. Belly hight is 16.0" with the axle width at 82.50" and axle centers at FS70.5"
The gap from the bottom of the socket and the belly is as you see. The only way to get it all the way down was to lower the belly to 15" which was not considered an option. Belly hight is 16.0" with the axle width at 82.50" and axle centers at FS70.5"