|
IMGA0635
Rib ready for floxing
Date: 04/14/2013
Views: 7528
|
|
|
IMGA1259
Not bad looking for a classic wing if i do say so myself. Had to make a wing dolly for easier manoeuvrability round the shop.
Date: 09/23/2013
Views: 20752
|
|
|
IMGA0661
Screws through ribs to align blocks.....must remember to remove them before the lay up
Date: 04/17/2013
Views: 6670
|
|
|
IMGA0572
Date: 03/17/2013
Views: 9034
|
|
|
IMGA0820
Aileron closeout
Date: 05/15/2013
Views: 9508
|
|
|
IMGA0634
Shimmed for correct washout
Date: 04/14/2013
Views: 7595
|
|
|
IMGA1057
And a few hours later.......
Date: 08/09/2013
Views: 7161
|
|
|
IMGA0664
Scrap bit of foam which will get sanded to match the profile of the block. It takes up the gap between spar and end of the block
Date: 04/17/2013
Views: 7325
|
|
|
IMGA0657
After repair
Date: 04/17/2013
Views: 7639
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 7355
|
|
|
IMGA0589
Date: 03/29/2013
Views: 11212
|
|
|
IMGA0571
Date: 03/17/2013
Views: 25284
|
|
|
IMGA0623
Date: 04/09/2013
Views: 8450
|
|
|
IMGA0800
all that work then you have to cut a big chunk out!!
Date: 05/13/2013
Views: 7593
|
|
|
IMGA0624
Date: 04/11/2013
Views: 8355
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 7142
|
|
|
IMGA0581
Date: 03/18/2013
Views: 10315
|
|
|
IMGA0722
Just testing out the rear blocks for an idea what it will look like
Date: 04/24/2013
Views: 7420
|
|
|
IMGA0754
These straps are great, one down one to go
Date: 05/05/2013
Views: 7480
|
|
|
IMGA0878
Wing rib close outs
Date: 05/30/2013
Views: 8529
|
|