|
IMGA0657
After repair
Date: 04/17/2013
Views: 7442
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 6941
|
|
|
IMGA1259
Not bad looking for a classic wing if i do say so myself. Had to make a wing dolly for easier manoeuvrability round the shop.
Date: 09/23/2013
Views: 20196
|
|
|
IMGA0585
Date: 03/18/2013
Views: 10403
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 7133
|
|
|
IMGA1057
And a few hours later.......
Date: 08/09/2013
Views: 6943
|
|
|
IMGA0712
Made some stands and a reference plate which is at 90 degrees to the spar
Date: 04/23/2013
Views: 7628
|
|
|
IMGA0756
Some dry micro to stick the block to the spar
Date: 05/05/2013
Views: 6778
|
|
|
IMGA0573
Date: 03/17/2013
Views: 9761
|
|
|
IMGA0572
Date: 03/17/2013
Views: 8793
|
|
|
IMGA0707
The next day me and my helper Ang did the other wing. This time it only took 6 and half hours so left us time to trim the other wing
Date: 04/21/2013
Views: 7081
|
|
|
IMGA0635
Rib ready for floxing
Date: 04/14/2013
Views: 7326
|
|
|
IMGA0722
Just testing out the rear blocks for an idea what it will look like
Date: 04/24/2013
Views: 7209
|
|
|
IMGA0613
Date: 04/09/2013
Views: 11418
|
|
|
IMGA0571
Date: 03/17/2013
Views: 24682
|
|
|
IMGA0641
EXOTHERM!! My worst moment yet
Date: 04/16/2013
Views: 7278
|
|
|
IMGA0754
These straps are great, one down one to go
Date: 05/05/2013
Views: 7280
|
|
|
IMGA0634
Shimmed for correct washout
Date: 04/14/2013
Views: 7386
|
|
|
IMGA0785
One side done. A straight edge is bonded on to aid rigidity once some of the foam is cut away
Date: 05/12/2013
Views: 7565
|
|
|
IMGA0664
Scrap bit of foam which will get sanded to match the profile of the block. It takes up the gap between spar and end of the block
Date: 04/17/2013
Views: 7139
|
|