|
IMGA0571
Date: 03/17/2013
Views: 26385
|
|
|
IMGA0581
Date: 03/18/2013
Views: 10668
|
|
|
IMGA0657
After repair
Date: 04/17/2013
Views: 7915
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 7492
|
|
|
IMGA0756
Some dry micro to stick the block to the spar
Date: 05/05/2013
Views: 7315
|
|
|
IMGA0620
Date: 04/09/2013
Views: 8643
|
|
|
IMGA0732
The other rear blocks, laying up the ribs and including the mounting plates for the flap hinges.
Date: 04/25/2013
Views: 7443
|
|
|
IMGA0664
Scrap bit of foam which will get sanded to match the profile of the block. It takes up the gap between spar and end of the block
Date: 04/17/2013
Views: 7663
|
|
|
IMGA0800
all that work then you have to cut a big chunk out!!
Date: 05/13/2013
Views: 7960
|
|
|
IMGA0770
Two are a time baby yeah!!!!!
Date: 05/10/2013
Views: 7866
|
|
|
IMGA1030
Wing tips prepped for shaping thanks to Tony K's web blog on his kit #272
Date: 08/08/2013
Views: 8420
|
|
|
IMGA0878
Wing rib close outs
Date: 05/30/2013
Views: 8952
|
|
|
IMGA0722
Just testing out the rear blocks for an idea what it will look like
Date: 04/24/2013
Views: 7714
|
|
|
IMGA0712
Made some stands and a reference plate which is at 90 degrees to the spar
Date: 04/23/2013
Views: 8163
|
|
|
IMGA1057
And a few hours later.......
Date: 08/09/2013
Views: 7489
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 7750
|
|
|
IMGA0754
These straps are great, one down one to go
Date: 05/05/2013
Views: 7813
|
|
|
IMGA0833
Remove trailing edge support ready for skin lay up
Date: 05/17/2013
Views: 9140
|
|
|
IMGA0634
Shimmed for correct washout
Date: 04/14/2013
Views: 7897
|
|
|
IMGA0635
Rib ready for floxing
Date: 04/14/2013
Views: 7810
|
|