|
p1000687
p1000687.jpg
Date: 03/12/2012
Views: 6574
|
|
|
p1000627
p1000627.jpg
Date: 02/14/2012
Views: 7189
|
|
|
p1000631
p1000631.jpg
Date: 02/14/2012
Views: 7007
|
|
|
p1000704
p1000704.jpg
Date: 03/12/2012
Views: 5861
|
|
|
nex_2014_01_12_01
Bolt hole for LG port side filed to size.
Date: 01/13/2014
Views: 6693
|
|
|
dsc09049
Layup Port side complete with peel ply. Notice the glad wrap to keep air from getting under the peel ply. 420 = 46g, aeropoxy ~ 200g
Date: 01/24/2013
Views: 8031
|
|
|
nex_2014_01_25_02
Starboard side of the air bubble fix on rib one. Used Flox with aeroboxy as a fillit.
Date: 01/25/2014
Views: 6949
|
|
|
dsc08641
Was going to use another plywood rib here but decided that the wide strap works fine. I later added some foam to the strap to give it some padding.
Date: 04/15/2012
Views: 8098
|
|
|
p1000692
p1000692.jpg
Date: 03/12/2012
Views: 5788
|
|
|
DSC08800
starboard side
Date: 06/05/2012
Views: 9182
|
|
|
dsc08965
Port side after layups and peel ply removed. Notice shape of hole for the angle of the LG socket. I wrapped the LG socket with sandpaper and used it to form the hole.
Date: 10/01/2012
Views: 9443
|
|
|
dsc08622
Removed.
Date: 04/14/2012
Views: 15478
|
|
|
dsc09066
Port side peel ply removed. Oh notice the caps in the sockets. What I did was take a block of foam and push it down in the socket, then took it back out and covered it with car wax. Once all the ribs are in I'll see how it worked.
Date: 01/25/2013
Views: 8026
|
|
|
nex_2014_01_25_32
nex_2014_01_25_32.jpg
Date: 01/26/2014
Views: 8592
|
|
|
nex_2014_01_25_17
Rolled out on the grass. Notice the tail wheel is still there. I left it in due to not having the stacks of cash to hold the nose down.
Date: 01/26/2014
Views: 7128
|
|
|
dsc09075
Stbd side after cure. We died the uni in with rib 1.
Date: 01/26/2013
Views: 8118
|
|
|
nex_2013_08_24_03
nex_2013_08_24_03.jpg
Date: 08/25/2013
Views: 6523
|
|
|
dsc08964
Port side. Fitting of LG socket.
Date: 10/01/2012
Views: 8864
|
|
|
dsc08603
Since I'm going to have to remove the mono wheel I dont have much of an edge to close in the big hole in the bottom. I'll have a better look at it once its a tri-gear.
Date: 04/10/2012
Views: 10740
|
|
|
dsc09052
Wetting out stbd side.
Date: 01/24/2013
Views: 8179
|
|