|
IMG_1578ann
2011 03 11 Installation of the parking brake valve completed and the brake lines attached. Hard to believe that took all day...
Date: 03/11/2011
Views: 2555
|
|
|
IMG_1501post
Need to keep things out of the way.
Date: 02/18/2011
Views: 2946
|
|
|
IMG_1226ann
Finally got the baffle mounted. Only now I see I need to re-do the safety wiring.
Date: 03/18/2011
Views: 2673
|
|
|
IMG_0164post
Date: 09/05/2010
Views: 3045
|
|
|
IMG_0041post
Date: 09/01/2010
Views: 3463
|
|
|
IMG_1365
Upon closer examination, the corner of the intercooler was impinging in the cowl preventing it going into place.
Date: 05/17/2011
Views: 3133
|
|
|
IMG_1284ann
Cut a piece of aluminum for the console cover. Laid out the pattern on the aluminum sheet and traced around it.
Date: 03/30/2011
Views: 2933
|
|
|
IMG_0098post
Date: 09/03/2010
Views: 2891
|
|
|
Flap Mark Location
Here's where they ended up, the 27.25" inboard from the outboard end of the flap.
Date: 07/01/2011
Views: 3800
|
|
|
IMG_0031post
Date: 08/30/2010
Views: 3354
|
|
|
IMG_0113post
Date: 09/03/2010
Views: 2841
|
|
|
IMG_0456ann
2010 10 18 Mounted the new brake master cylinder with clecos to establish the location and size of the hole in the console needed for the brake levers.
Date: 10/18/2010
Views: 2983
|
|
|
IMG_0017post
Date: 08/30/2010
Views: 6452
|
|
|
IMG_1222ann
2011 03 18 Received my Poly-Flow brake line. It's more flexible than the other stuff. It can be routed to suit. All the brake system needs is the new reservoir and it can be filled/bled.
Date: 03/18/2011
Views: 3054
|
|
|
IMG_0158post
Date: 09/05/2010
Views: 2810
|
|
|
New MC-4A02
And it's too wide to fit in between the mounts. I have 1 1/4 x 1 1/4 x 1/8 Al angle on order to fix the width problem and I think I know how to fix the length problem as well. Then I can address the height issue...
Date: 04/11/2012
Views: 2937
|
|
|
IMG_0212post
Date: 09/09/2010
Views: 2505
|
|
|
IMG_0099post
Date: 09/03/2010
Views: 2752
|
|
|
IMG_0110post
Date: 09/03/2010
Views: 2930
|
|
|
IMG_0457ann
2010 10 20 While in Florida, I had Bud go over the aircraft to see what issues he could find. One issue was the lack of spar pin reinforcements when the cockpit module was built.
Date: 10/20/2010
Views: 3159
|
|