|
FirewallPanels04
Date: 03/11/2004
Views: 2820
|
|
|
FlapDrive18Ann
Date: 08/15/2004
Views: 2161
|
|
|
EuropaCheckListBack
Date: 12/06/2008
Views: 3626
|
|
|
img0248copy
Date: 07/29/2007
Views: 8302
|
|
|
IMG_2261Ann
Date: 10/06/2008
Views: 3455
|
|
|
Battery16Ann
Date: 04/30/2005
Views: 2934
|
|
|
Calliper 2
The best solution is shown in this pic from Mike Parkin. A Banjo fitting. The Banjo bolt is straight threads, it lies low, out of the way of grabby things and is stoutly attached. So, I have a number of bits on order from various suppliers in an attem
Date: 06/23/2009
Views: 3240
|
|
|
DoorMount37Ann
Date: 07/08/2004
Views: 2549
|
|
|
SA 2012 02 P56
Sport Aviation, February 2012, page 56, "When to Overhaul" by Mike Busch/Commentary/SAVVY AVIATION.
Date: 02/22/2012
Views: 4202
|
|
|
ComAntenna02
Date: 02/05/2004
Views: 2660
|
|
|
IMG_1233ann
Went home and pulled a brake caliper off my Little Toot project. Brought it out to the hanger and the darn thing fits. So I have ordered a single puck version of the same brake caliper. When it arrives, it will go on and I'll replace the banjo hose end
Date: 06/21/2010
Views: 3034
|
|
|
IMG_2855
Date: 12/03/2008
Views: 3568
|
|
|
IMG_1138
Date: 08/30/2007
Views: 3025
|
|
|
DSCN5118
Date: 11/29/1999
Views: 5242
|
|
|
IMG_8089Ann
Date: 07/08/2008
Views: 3351
|
|
|
PortWingCover01
Date: 12/10/2003
Views: 2685
|
|
|
IMG_6044post
Date: 08/09/2009
Views: 3092
|
|
|
LGLever16Ann_001
Date: 06/18/2004
Views: 2381
|
|
|
IMG_5248ann
Date: 06/13/2009
Views: 3155
|
|
|
IMG_2456
Drilling for the rivets to hold the anchor nuts required novel technique. Eventually, all anchor nuts were installed.
Date: 10/25/2011
Views: 4510
|
|