|
IMGA0635
Rib ready for floxing
Date: 04/14/2013
Views: 7323
|
|
|
IMGA0737
The small bloke with two mounting plates at the outrigger position.
Date: 04/26/2013
Views: 7138
|
|
|
IMGA0571
Date: 03/17/2013
Views: 24667
|
|
|
IMGA1057
And a few hours later.......
Date: 08/09/2013
Views: 6940
|
|
|
IMGA0641
EXOTHERM!! My worst moment yet
Date: 04/16/2013
Views: 7270
|
|
|
IMGA0620
Date: 04/09/2013
Views: 8091
|
|
|
IMGA0712
Made some stands and a reference plate which is at 90 degrees to the spar
Date: 04/23/2013
Views: 7627
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 7132
|
|
|
IMGA0722
Just testing out the rear blocks for an idea what it will look like
Date: 04/24/2013
Views: 7206
|
|
|
IMGA0660
You can see the wash out build into the block
Date: 04/17/2013
Views: 6791
|
|
|
IMGA0589
Date: 03/29/2013
Views: 10927
|
|
|
IMGA0626
Hole ready for stall warner
Date: 04/11/2013
Views: 7745
|
|
|
IMGA0664
Scrap bit of foam which will get sanded to match the profile of the block. It takes up the gap between spar and end of the block
Date: 04/17/2013
Views: 7137
|
|
|
IMGA0661
Screws through ribs to align blocks.....must remember to remove them before the lay up
Date: 04/17/2013
Views: 6460
|
|
|
IMGA0750
Made a tube of bid to carry the pitot tubes from one block to another. This block is where the bell crank sits and the push rod goes to the aileron.
Date: 05/05/2013
Views: 7234
|
|
|
IMGA0624
Date: 04/11/2013
Views: 8145
|
|
|
IMGA1030
Wing tips prepped for shaping thanks to Tony K's web blog on his kit #272
Date: 08/08/2013
Views: 7785
|
|
|
IMGA0657
After repair
Date: 04/17/2013
Views: 7439
|
|
|
IMGA0811
Flap closeout
Date: 05/14/2013
Views: 9238
|
|
|
IMGA0770
Two are a time baby yeah!!!!!
Date: 05/10/2013
Views: 7329
|
|