|
20141102_161000
template for new firewall.
Date: 11/02/2014
Views: 17625
|
|
|
dsc09032
Port side done.
Date: 01/22/2013
Views: 8725
|
|
|
dsc08963
Port side. LG socket fitting.
Date: 10/01/2012
Views: 10575
|
|
|
dsc09057
Wetting out stbd side.
Date: 01/24/2013
Views: 8928
|
|
|
NEX_2013-11-12-37
N111EU at rest.
Date: 11/13/2013
Views: 33190
|
|
|
dsc08622
Removed.
Date: 04/14/2012
Views: 18840
|
|
|
dsc09036
Rib one port side again used around 112g of 420 cured at 78f for 12 hours.
Date: 01/23/2013
Views: 9088
|
|
|
p1000633
p1000633.jpg
Date: 02/14/2012
Views: 7095
|
|
|
p1000708
p1000708.jpg
Date: 03/12/2012
Views: 6103
|
|
|
p1000716
p1000716.jpg
Date: 03/12/2012
Views: 6628
|
|
|
2012-08-18_19-58-15_689
Port side. Red highlighted area shows area with little reinforcement on inside. This is before I did the belly layup per the manual.
Date: 08/19/2012
Views: 11746
|
|
|
nex_2014_01_25_05
My lovely bride helping us out. Notice the jig is the mono wheel trailer.
Date: 01/25/2014
Views: 8472
|
|
|
dsc09048
Template for the Stbd side. Note, you are not required per the manual to hook over the plywood with bid.
Date: 01/24/2013
Views: 9196
|
|
|
This is the printer part showing the parts in place.
This is the printer part showing the parts in place.
Date: 04/03/2016
Views: 13907
|
|
|
p1000730
p1000730.jpg
Date: 03/12/2012
Views: 6398
|
|
|
dsc08965
Port side after layups and peel ply removed. Notice shape of hole for the angle of the LG socket. I wrapped the LG socket with sandpaper and used it to form the hole.
Date: 10/01/2012
Views: 10834
|
|
|
20141102_161049
20141102_161049.jpg
Date: 11/02/2014
Views: 15841
|
|
|
dsc09051
Mix it up Kim! FYI I hate this scale from aircraft spruce, it times out in one min if your plugged in or not. I would have to tap the scale while Kim mixed. We were using masks due to being in an enclosed area and I'm very allergic to the hardener (bumm
Date: 01/24/2013
Views: 9272
|
|
|
20141102_154450
Gear cover removed, now for removing the throttle box. This is all prep work to patch up the mono wheel hole.
Date: 11/02/2014
Views: 18699
|
|
|
dsc08960
Stb side after layups and peel ply removed.
Date: 10/01/2012
Views: 12545
|
|