|
nex_2014_01_25_28
Wings on. Not really required at the stage. Just had to do it for motivation.
Date: 01/26/2014
Views: 8271
|
|
|
dsc09051
Mix it up Kim! FYI I hate this scale from aircraft spruce, it times out in one min if your plugged in or not. I would have to tap the scale while Kim mixed. We were using masks due to being in an enclosed area and I'm very allergic to the hardener (bumm
Date: 01/24/2013
Views: 8978
|
|
|
p1000721
p1000721.jpg
Date: 03/12/2012
Views: 7134
|
|
|
dsc08617
After removing the green tape.
Date: 04/14/2012
Views: 70806
|
|
|
p1000470
p1000470.jpg
Date: 12/09/2011
Views: 11835
|
|
|
nex_2014_01_25_15
Doing mod 59.
Date: 01/25/2014
Views: 7726
|
|
|
p1000715
p1000715.jpg
Date: 03/12/2012
Views: 6806
|
|
|
dsc09027
Mixing that expensive 420.
Date: 01/22/2013
Views: 8854
|
|
|
p1000714
p1000714.jpg
Date: 03/12/2012
Views: 6573
|
|
|
p1000716
p1000716.jpg
Date: 03/12/2012
Views: 6580
|
|
|
nex_2014_01_12_06
She's got a leg!
Date: 01/13/2014
Views: 7763
|
|
|
dsc09018
Started to make the axle jig. Used a simple setup of first taking large flat blocks of wood and caulking it to the floor somewhere over FS70. Then that allows me to fix the aluminum angle with a single screw once in its final position.
Date: 01/10/2013
Views: 10230
|
|
|
dsc09021
BIG THANK YOU to my Uncle Kim Prout for flying out to help me with getting the gear legs set. He also helped me slow down and plan ahead. As an excited new builder its easy to get in a rush to try achieve something tangible. Im sure after that week of b
Date: 01/22/2013
Views: 9140
|
|
|
photo
No pictures of the progress of putting in the LG layups on the port side. Here I am putting down the peel ply.
Date: 08/20/2012
Views: 15621
|
|
|
dsc08401
I see you!
Date: 03/25/2012
Views: 9122
|
|
|
dsc08627
The monowheel landing gear is in the up position and resting on the main wheel with some of the weight held by the block and tackle. This was taken just before putting on the braces to keep her from rolling. Been trying to get rid of that tv in the back
Date: 04/14/2012
Views: 11363
|
|
|
p1000700
p1000700.jpg
Date: 03/12/2012
Views: 10066
|
|
|
dsc08602
Landing gear parts. The nose gear leg is having MOD 53 performed on it at my fauther in-laws.
Date: 04/10/2012
Views: 9741
|
|
|
dsc08664
The gell coat really gums up the sand paper. Still a bit more to remove.
Date: 04/22/2012
Views: 14001
|
|
|
20141102_161049
20141102_161049.jpg
Date: 11/02/2014
Views: 15286
|
|