|
dsc09076
Bottom layup of the port side.
Date: 01/26/2013
Views: 9047
|
|
|
p1000724
p1000724.jpg
Date: 03/12/2012
Views: 7653
|
|
|
dsc09039
Port side done after cure.
Date: 01/23/2013
Views: 9257
|
|
|
dsc08640
OK not the best shot but here you can see I used the jack to move the rear rib in place under the airframe being careful not to pinch the belly. I then secured the rib in place but using some drywall screws in the 2x6. This way any weight will be transf
Date: 04/15/2012
Views: 8962
|
|
|
dsc08629
In a few mins she will no longer be a monowheel :-(
Date: 04/14/2012
Views: 8985
|
|
|
DSC08799
Port side
Date: 06/05/2012
Views: 10124
|
|
|
dsc08622
Removed.
Date: 04/14/2012
Views: 18565
|
|
|
dsc08960
Stb side after layups and peel ply removed.
Date: 10/01/2012
Views: 12372
|
|
|
p1000636
p1000636.jpg
Date: 02/14/2012
Views: 6264
|
|
|
dsc09029
Gear legs clamped in place, no toe in/out per Bud. You cant see it in the photo but I used a green tip .30 bullet as a homemade plum bob that was attached to dead center of the aluminum angle. This helped us keep the guide over the center line. Oh make
Date: 01/22/2013
Views: 9332
|
|
|
p1000707
p1000707.jpg
Date: 03/12/2012
Views: 6747
|
|
|
p1000472
p1000472.jpg
Date: 12/13/2011
Views: 13488
|
|
|
dsc09044
Port side being keyed.
Date: 01/23/2013
Views: 8586
|
|
|
20141102_161000
template for new firewall.
Date: 11/02/2014
Views: 17369
|
|
|
p1000690
p1000690.jpg
Date: 03/12/2012
Views: 6537
|
|
|
dsc09046
Making a layup schedule for rib 1.
Date: 01/23/2013
Views: 9155
|
|
|
dsc08401
I see you!
Date: 03/25/2012
Views: 9164
|
|
|
p1000725
p1000725.jpg
Date: 03/12/2012
Views: 6947
|
|
|
nex_2014_01_25_02
Starboard side of the air bubble fix on rib one. Used Flox with aeroboxy as a fillit.
Date: 01/25/2014
Views: 8196
|
|
|
nex_2014_01_25_31
Starboard side, need to trim the bolt.
Date: 01/26/2014
Views: 9164
|
|