|
dsc09046
Making a layup schedule for rib 1.
Date: 01/23/2013
Views: 9123
|
|
|
dsc08622
Removed.
Date: 04/14/2012
Views: 18438
|
|
|
dsc08638
I used some thick good quality carpet to pad the ribs.
Date: 04/15/2012
Views: 8368
|
|
|
dsc08664
The gell coat really gums up the sand paper. Still a bit more to remove.
Date: 04/22/2012
Views: 14112
|
|
|
nex_2014_01_25_32
nex_2014_01_25_32.jpg
Date: 01/26/2014
Views: 10030
|
|
|
20141102_154450
Gear cover removed, now for removing the throttle box. This is all prep work to patch up the mono wheel hole.
Date: 11/02/2014
Views: 18353
|
|
|
dsc08961
Stb side two layers bid 10" and 8" peel ply removed
Date: 10/01/2012
Views: 12150
|
|
|
dsc08626
Put in a 2x4 in the main wing spar tunnel and located the pins. This was only used to aid in keeping the plane from tipping.
Date: 04/14/2012
Views: 12357
|
|
|
dsc09034
Starboard side done. Pic taken before a little clean up.
Date: 01/22/2013
Views: 8330
|
|
|
nex_2014_01_25_17
Rolled out on the grass. Notice the tail wheel is still there. I left it in due to not having the stacks of cash to hold the nose down.
Date: 01/26/2014
Views: 8369
|
|
|
dsc09052
Wetting out stbd side.
Date: 01/24/2013
Views: 9290
|
|
|
dsc09062
Bill applying peel ply!
Date: 01/24/2013
Views: 8979
|
|
|
dsc09068
Seeing how ribs 2,3,4 line up. Get a belt sander 4x36, you'll be glad you did. Mine is from Harbor Freight.
Date: 01/25/2013
Views: 9982
|
|
|
20141102_161049
20141102_161049.jpg
Date: 11/02/2014
Views: 15537
|
|
|
nex_2014_01_12_06
She's got a leg!
Date: 01/13/2014
Views: 7862
|
|
|
dsc09060
Wetting out stbd side.
Date: 01/24/2013
Views: 8952
|
|
|
DSC08800
starboard side
Date: 06/05/2012
Views: 10284
|
|
|
dsc08966
Port side LG socket hole.
Date: 10/01/2012
Views: 11319
|
|
|
dsc09048
Template for the Stbd side. Note, you are not required per the manual to hook over the plywood with bid.
Date: 01/24/2013
Views: 8972
|
|
|
2012-08-18_19-58-42_666
Port side. Same area as before just without the flash. Backlit from the inside to show areas with less material. This is before I did the belly layup per the manual.
Date: 08/19/2012
Views: 12012
|
|