|
IMG_0203post
Date: 09/08/2010
Views: 5121
|
|
|
IMG_0076post
Date: 09/01/2010
Views: 3111
|
|
|
Flap Mark Location
Here's where they ended up, the 27.25" inboard from the outboard end of the flap.
Date: 07/01/2011
Views: 3888
|
|
|
New MC-4A01
2012 04 12 - Well, didn't take very long today to decide the new brake assembly wouldn't fit. It's too long.
Date: 04/11/2012
Views: 3323
|
|
|
IMG_0003ann
Date: 08/30/2010
Views: 5949
|
|
|
New MC-4A 11
Because the sides are narrower and closer to the ends of the MC-4A's the old outer spacers no longer fit and it would be impossible to further shorten them, they have been replaced with a couple washers.
Date: 04/15/2012
Views: 5950
|
|
|
IMG_1415
Bonding the aluminum angle bracket for the brake reservoir with Araldite
Date: 05/28/2011
Views: 3404
|
|
|
IMG_1673
Used the beading machine to turn down the edges of the console cover. That added a lot of stiffness and looks better as well. Then painted it grey to match the grey interior.
Date: 04/28/2011
Views: 3117
|
|
|
IMG_0135post
Date: 09/03/2010
Views: 2935
|
|
|
IMG_0101post
Date: 09/03/2010
Views: 2846
|
|
|
IMG_0099post
Date: 09/03/2010
Views: 2834
|
|
|
IMG_0048post
Date: 09/01/2010
Views: 2966
|
|
|
IMG_3327em
Next request was for a compression check. 80/80, 80/80, 80/80, 79/80. No problem there. But while doing this I decided to check the plugs. Cylinder #3 plugs looked different. WHY?
Date: 06/12/2012
Views: 4591
|
|
|
IMG_0134post
Date: 09/03/2010
Views: 3140
|
|
|
IMG_0102post
Date: 09/03/2010
Views: 2812
|
|
|
IMG_1366
OK, what's different about the way the intercooler went back on? Nothing is ever easy...
Date: 05/17/2011
Views: 3230
|
|
|
IMG_1689
Getting closer.
Date: 05/10/2011
Views: 2992
|
|
|
IMG_0129post
Date: 09/03/2010
Views: 3294
|
|
|
IMG_0143post
Date: 09/04/2010
Views: 2757
|
|
|
IMG_1587ann
2011 03 13 Looking to see how all the brake lines will fit.
Date: 03/15/2011
Views: 2884
|
|