|
IMGA0707
The next day me and my helper Ang did the other wing. This time it only took 6 and half hours so left us time to trim the other wing
Date: 04/21/2013
Views: 7565
|
|
|
IMGA0878
Wing rib close outs
Date: 05/30/2013
Views: 8942
|
|
|
IMGA1057
And a few hours later.......
Date: 08/09/2013
Views: 7479
|
|
|
IMGA0701
First wings L.E layed up and peel plyed. The blue foam is keeping in place a 90 degree strip which is keeping the end of the uni cloth bent under to aid bonding to the rear of the spar. A helpful tip from Mike Gregory.......Oh wanted to say it took 8 and
Date: 04/20/2013
Views: 7745
|
|
|
IMGA0641
EXOTHERM!! My worst moment yet
Date: 04/16/2013
Views: 7736
|
|
|
IMGA0661
Screws through ribs to align blocks.....must remember to remove them before the lay up
Date: 04/17/2013
Views: 6996
|
|
|
IMGA0572
Date: 03/17/2013
Views: 9353
|
|
|
IMGA0811
Flap closeout
Date: 05/14/2013
Views: 9908
|
|
|
IMGA0833
Remove trailing edge support ready for skin lay up
Date: 05/17/2013
Views: 9129
|
|
|
IMGA0620
Date: 04/09/2013
Views: 8636
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 7483
|
|
|
IMGA0635
Rib ready for floxing
Date: 04/14/2013
Views: 7798
|
|
|
IMGA0820
Aileron closeout
Date: 05/15/2013
Views: 9923
|
|
|
IMGA0571
Date: 03/17/2013
Views: 26342
|
|
|
IMGA0737
The small bloke with two mounting plates at the outrigger position.
Date: 04/26/2013
Views: 7720
|
|
|
IMGA1030
Wing tips prepped for shaping thanks to Tony K's web blog on his kit #272
Date: 08/08/2013
Views: 8410
|
|
|
IMGA0770
Two are a time baby yeah!!!!!
Date: 05/10/2013
Views: 7857
|
|
|
IMGA0785
One side done. A straight edge is bonded on to aid rigidity once some of the foam is cut away
Date: 05/12/2013
Views: 8130
|
|
|
IMGA0716
Cracked off the jig, flipped over, and there we go iv got half a wing!!
Date: 04/23/2013
Views: 7402
|
|
|
IMGA0585
Date: 03/18/2013
Views: 11027
|
|