UNDERSTANDING THE 914 ROTAX. Download this PDF by clicking "DOWNLOAD DOCUMENT" after you click no thumbnail
Date: 08/08/2010
Views: 2534
Duxford_17_8_09_070
Date: 08/17/2009
Views: 2942
Newest Image
EAA SITE
Date: 08/23/2023
Views: 159573
Port headrest conduit 2.
We needed to modify the hole saw to accomplish the task of installing the conduit.
First thing was to grind off the weld bead on the aft side of the hole saw. You can see the weld ground off on the prior pict.
I used a belt sander to begin with, then proceeded to use a grindstone and finished off with the belt sander.
Then my extra long 1/4" drill bit became not so long. We needed to harvest a piece of 1/4" drill rod with no flutes on it. After cutting the shank off with the grind stone and smoothing both ends, I ground a flat on the portion that aligns with the setscrew.
Y10-08-21