|
dsc09027
Mixing that expensive 420.
Date: 01/22/2013
Views: 8967
|
|
|
dsc09035
Rib one after cure of 420 and peel ply removed. Think we used 112g of 420 here due to the odd angle.
Date: 01/23/2013
Views: 8426
|
|
|
nex_2014_01_12_06
She's got a leg!
Date: 01/13/2014
Views: 7846
|
|
|
dsc08664
The gell coat really gums up the sand paper. Still a bit more to remove.
Date: 04/22/2012
Views: 14099
|
|
|
dsc09036
Rib one port side again used around 112g of 420 cured at 78f for 12 hours.
Date: 01/23/2013
Views: 8911
|
|
|
dsc08965
Port side after layups and peel ply removed. Notice shape of hole for the angle of the LG socket. I wrapped the LG socket with sandpaper and used it to form the hole.
Date: 10/01/2012
Views: 10609
|
|
|
dsc08619
Roap tied to the engine mount frame to hoist the airframe.
Date: 04/14/2012
Views: 17099
|
|
|
nex_2014_01_25_28
Wings on. Not really required at the stage. Just had to do it for motivation.
Date: 01/26/2014
Views: 8382
|
|
|
dsc09023
Ensure you have a good key. I used the drill press to create the dimples. These will be filled with 420 and flox when doing the glass layups.
Date: 01/22/2013
Views: 9278
|
|
|
dsc08626
Put in a 2x4 in the main wing spar tunnel and located the pins. This was only used to aid in keeping the plane from tipping.
Date: 04/14/2012
Views: 12342
|
|
|
DSC08801
starboard side
Date: 06/05/2012
Views: 10267
|
|
|
dsc09052
Wetting out stbd side.
Date: 01/24/2013
Views: 9285
|
|
|
dsc09041
Port side guides being placed for layup.
Date: 01/23/2013
Views: 9218
|
|
|
nex_2014_01_25_17
Rolled out on the grass. Notice the tail wheel is still there. I left it in due to not having the stacks of cash to hold the nose down.
Date: 01/26/2014
Views: 8358
|
|
|
dsc09062
Bill applying peel ply!
Date: 01/24/2013
Views: 8972
|
|
|
nex_2014_01_25_15
Doing mod 59.
Date: 01/25/2014
Views: 7816
|
|
|
dsc08662
The 10“ diameter from the pilot hole.
Date: 04/22/2012
Views: 13187
|
|
|
dsc08629
In a few mins she will no longer be a monowheel :-(
Date: 04/14/2012
Views: 8939
|
|
|
dsc08630
Though this was a neat pic of the mono wheel in the retracted position.
Date: 04/14/2012
Views: 8010
|
|
|
dsc09067
dsc09067.jpg
Date: 01/25/2013
Views: 9025
|
|