|
DSC08797
Port side
Date: 06/05/2012
Views: 9051
|
|
|
dsc08628
Nic pic of the plane! If Bill would move his head out of the way! Notice I'm using a bungee cord to hold the doors open.
Date: 04/14/2012
Views: 7933
|
|
|
dsc08401
I see you!
Date: 03/25/2012
Views: 8630
|
|
|
dsc09052
Wetting out stbd side.
Date: 01/24/2013
Views: 8058
|
|
|
p1000711
p1000711.jpg
Date: 03/12/2012
Views: 6214
|
|
|
dsc09023
Ensure you have a good key. I used the drill press to create the dimples. These will be filled with 420 and flox when doing the glass layups.
Date: 01/22/2013
Views: 7867
|
|
|
p1000637
p1000637.jpg
Date: 02/14/2012
Views: 6262
|
|
|
dsc08606
Old mass balance arm.
Date: 04/10/2012
Views: 9447
|
|
|
p1000699
p1000699.jpg
Date: 03/12/2012
Views: 9551
|
|
|
dsc08626
Put in a 2x4 in the main wing spar tunnel and located the pins. This was only used to aid in keeping the plane from tipping.
Date: 04/14/2012
Views: 10331
|
|
|
20141102_154450
Gear cover removed, now for removing the throttle box. This is all prep work to patch up the mono wheel hole.
Date: 11/02/2014
Views: 15270
|
|
|
dsc08622
Removed.
Date: 04/14/2012
Views: 15250
|
|
|
dsc08661
Locating the center of the main gear hole. Used a pilot to be used to measure out the 10“ diameter on the bottom.
Date: 04/22/2012
Views: 11186
|
|
|
dsc09021
BIG THANK YOU to my Uncle Kim Prout for flying out to help me with getting the gear legs set. He also helped me slow down and plan ahead. As an excited new builder its easy to get in a rush to try achieve something tangible. Im sure after that week of b
Date: 01/22/2013
Views: 7935
|
|
|
p1000708
p1000708.jpg
Date: 03/12/2012
Views: 5748
|
|
|
2012-08-18_19-58-42_666
Port side. Same area as before just without the flash. Backlit from the inside to show areas with less material. This is before I did the belly layup per the manual.
Date: 08/19/2012
Views: 10820
|
|
|
dsc09066
Port side peel ply removed. Oh notice the caps in the sockets. What I did was take a block of foam and push it down in the socket, then took it back out and covered it with car wax. Once all the ribs are in I'll see how it worked.
Date: 01/25/2013
Views: 7872
|
|
|
nex_2014_01_25_17
Rolled out on the grass. Notice the tail wheel is still there. I left it in due to not having the stacks of cash to hold the nose down.
Date: 01/26/2014
Views: 7000
|
|
|
dsc09044
Port side being keyed.
Date: 01/23/2013
Views: 7308
|
|
|
dsc09075
Stbd side after cure. We died the uni in with rib 1.
Date: 01/26/2013
Views: 8017
|
|