|
IMGA0641
EXOTHERM!! My worst moment yet
Date: 04/16/2013
Views: 7187
|
|
|
IMGA0589
Date: 03/29/2013
Views: 10794
|
|
|
IMGA0820
Aileron closeout
Date: 05/15/2013
Views: 9104
|
|
|
IMGA0626
Hole ready for stall warner
Date: 04/11/2013
Views: 7666
|
|
|
IMGA1259
Not bad looking for a classic wing if i do say so myself. Had to make a wing dolly for easier manoeuvrability round the shop.
Date: 09/23/2013
Views: 19808
|
|
|
IMGA0737
The small bloke with two mounting plates at the outrigger position.
Date: 04/26/2013
Views: 7037
|
|
|
IMGA0620
Date: 04/09/2013
Views: 7980
|
|
|
IMGA1030
Wing tips prepped for shaping thanks to Tony K's web blog on his kit #272
Date: 08/08/2013
Views: 7664
|
|
|
IMGA0716
Cracked off the jig, flipped over, and there we go iv got half a wing!!
Date: 04/23/2013
Views: 6794
|
|
|
IMGA0673
Nicely shaped and blended in. The pipe sticking out runs all the way through the blocks and is to carry the wires from the fuselage to the wing tips for nav/strobe and hopefully landing lights
Date: 04/18/2013
Views: 6703
|
|
|
IMGA0722
Just testing out the rear blocks for an idea what it will look like
Date: 04/24/2013
Views: 7122
|
|
|
IMGA0732
The other rear blocks, laying up the ribs and including the mounting plates for the flap hinges.
Date: 04/25/2013
Views: 6754
|
|
|
IMGA0613
Date: 04/09/2013
Views: 11252
|
|
|
IMGA0664
Scrap bit of foam which will get sanded to match the profile of the block. It takes up the gap between spar and end of the block
Date: 04/17/2013
Views: 7037
|
|
|
IMGA0657
After repair
Date: 04/17/2013
Views: 7359
|
|
|
IMGA0712
Made some stands and a reference plate which is at 90 degrees to the spar
Date: 04/23/2013
Views: 7538
|
|
|
IMGA0754
These straps are great, one down one to go
Date: 05/05/2013
Views: 7171
|
|
|
IMGA0585
Date: 03/18/2013
Views: 10275
|
|
|
IMGA0680
These are the rear blocks where the bell cranks sit in. Note the vent holes
Date: 04/18/2013
Views: 6840
|
|
|
IMGA0800
all that work then you have to cut a big chunk out!!
Date: 05/13/2013
Views: 7241
|
|