|
YouTube Channel
I've started a YouTube channel to vlog my build progress. Come check it out and leave a message!https://www.youtube.com/watch?v=OFgPUfHvLDE&list=PL2HSwhQop_QOThtzPUa_zLaMRj7qWyOv3
Date: 07/17/2021
Views: 246015
|
|
|
20141102_162118
Cut it out.
Date: 11/02/2014
Views: 70433
|
|
|
dsc08617
After removing the green tape.
Date: 04/14/2012
Views: 69002
|
|
|
p1000468
p1000468.jpg
Date: 12/09/2011
Views: 33823
|
|
|
NEX_2013-11-12-37
N111EU at rest.
Date: 11/13/2013
Views: 32188
|
|
|
Orange part created in turbocad and printed on a 3D printer from ABS. Printer is a Prusa i3 X, cost is around $300.
Orange part created in turbocad and printed on a 3D printer from ABS. Printer is a Prusa i3 X, cost is around $300.
Date: 04/03/2016
Views: 19172
|
|
|
dsc08623
bungee cord removal.
Date: 04/14/2012
Views: 18529
|
|
|
20141102_153539
Out. Ad you can see the screw is sill in the nut plate. it came out later.
Date: 11/02/2014
Views: 18046
|
|
|
dsc08621
Removal of the brake master for the mono.
Date: 04/14/2012
Views: 18018
|
|
|
dsc08622
Removed.
Date: 04/14/2012
Views: 17641
|
|
|
20141102_154504
Cut old fuel lines. Gona have to replace them anyways. Now I just need to remove the stop block where the gear handle went.
Date: 11/02/2014
Views: 17510
|
|
|
20141102_154450
Gear cover removed, now for removing the throttle box. This is all prep work to patch up the mono wheel hole.
Date: 11/02/2014
Views: 17474
|
|
|
dsc08620
Removal of the mono firewall.
Date: 04/14/2012
Views: 16908
|
|
|
20141102_161000
template for new firewall.
Date: 11/02/2014
Views: 16419
|
|
|
dsc08619
Roap tied to the engine mount frame to hoist the airframe.
Date: 04/14/2012
Views: 16385
|
|
|
dsc08618
Block and tackle used to hoist the front of the aircraft to aid in creating a jig. This hoist reduces the weight to 25%.
Date: 04/14/2012
Views: 15974
|
|
|
20141102_161036
Everything looking good.
Date: 11/02/2014
Views: 15671
|
|
|
photo
No pictures of the progress of putting in the LG layups on the port side. Here I am putting down the peel ply.
Date: 08/20/2012
Views: 15399
|
|
|
20141102_161049
20141102_161049.jpg
Date: 11/02/2014
Views: 14803
|
|
|
Wanted to make a copy of B16 to make the cuts on before I cut the actual B16 part.
Wanted to make a copy of B16 to make the cuts on before I cut the actual B16 part.
Date: 04/03/2016
Views: 14442
|
|