|
IMG_2688
Cut away excess material on the sides of the angle. Will probably cut away more excess material from the base part of the angle.
Date: 04/09/2012
Views: 3567
|
|
|
IMG_0108post
Date: 09/03/2010
Views: 2847
|
|
|
IMG_0255post
Date: 09/14/2010
Views: 2869
|
|
|
IMG_3540em
While the airbox was off, I again check all the pressure hoses to the carbs. Oh, what have we here. BIG leaks in the pressure lines to the carb bowls. Two leaks like this. Not observed before because the fittings were tied to that fuel line and the sp
Date: 07/30/2012
Views: 6207
|
|
|
Wings on 3
Just had to get all the pitot/static lines and wing lighting wiring tucked into the wing root properly or they don't fit.
Date: 07/01/2011
Views: 3784
|
|
|
IMG_0254post
Date: 09/14/2010
Views: 2802
|
|
|
IMG_1669
Evaluating how the reservoir will be mounted/attached.
Date: 04/13/2011
Views: 3101
|
|
|
IMG_1471ann
2011 01 27 One final check of alignment before drilling.
Date: 01/27/2011
Views: 3200
|
|
|
IMG_1408
Still working on the brake plumbing. The translucent nylon was not fitting properly. Going back to the black stuff.
Date: 05/27/2011
Views: 3411
|
|
|
IMG_0199post
Date: 09/08/2010
Views: 2789
|
|
|
IMG_1465p
Received the second replacement X. This one was correct and applied.
Date: 06/05/2011
Views: 3026
|
|
|
IMG_0107post
Date: 09/03/2010
Views: 2684
|
|
|
IMG_1222ann
2011 03 18 Received my Poly-Flow brake line. It's more flexible than the other stuff. It can be routed to suit. All the brake system needs is the new reservoir and it can be filled/bled.
Date: 03/18/2011
Views: 3086
|
|
|
IMG_0193post
Date: 09/08/2010
Views: 2625
|
|
|
IMG_0248post
Date: 09/14/2010
Views: 3638
|
|
|
IMG_3331em
Turn the plugs over and one plug on #3 looks funny. Calls for a closer look...
Date: 06/12/2012
Views: 3641
|
|
|
IMG_2604
Got out the inspection mirror and made sure the gasket was in place all the way round the bowl. It was.
Date: 05/30/2012
Views: 5295
|
|
|
New MC-4A 05
With the attach fitting fully screwed on to the end of the thread, the last bit of thread is just visible in the fitting.
Date: 04/12/2012
Views: 2854
|
|
|
IMG_0081post
Date: 09/02/2010
Views: 3121
|
|
|
IMG_0184post
Date: 09/07/2010
Views: 2607
|
|