|
IMG_0400
Date: 04/14/2015
Views: 10209
|
|
|
IMG_0187.JPG (2)
Workshop kitted out. All done in 3 weeks!
Date: 04/13/2014
Views: 12142
|
|
|
DSC00158
Date: 09/03/2015
Views: 15275
|
|
|
DSC00163
Rudder opened up to accept the push rod bracket. Alas no blue foam as it is the NG model. No instructions on how to proceed. Advice from Europa is to bod in some blue foam is it is not load bearing and is just a bed for the composite.
Date: 09/04/2015
Views: 12471
|
|
|
DSC00228
Had to remove more of the rudder than I wanted so build up rudder trailing edge by attaching peel ply to the outside of the rudder and build up trailing edge using flox around the edge and an initial 2 ply of bid. i'll apply an additional 2 ply after the
Date: 09/10/2015
Views: 9925
|
|
|
IMG_0406
Date: 04/17/2015
Views: 9842
|
|
|
IMG_0279
Insulation going in
Date: 04/02/2014
Views: 11766
|
|
|
DSC00155
As you can see the Issue 1 Bearings are considerably longer and will require shortening once I have the correct dimensions.
Date: 09/03/2015
Views: 8682
|
|
|
IMG_0392
Date: 04/10/2015
Views: 9107
|
|
|
IMG_0821
Trial fitted the torque tube but it looks like the TP38 bearing is too short!
Date: 09/03/2015
Views: 8554
|
|
|
IMG_0823
Same of port side.
Date: 09/03/2015
Views: 8523
|
|
|
IMG_0237
Fuselage in the truck
Date: 02/01/2014
Views: 10751
|
|
|
IMG_0409
Date: 04/17/2015
Views: 9405
|
|
|
Rivets
Next problem. Once the push rod end was fitted and drilled according to the manual the rivets provided were too short to go through the whole structure. Awaiting a response from Europa
Date: 09/03/2015
Views: 10248
|
|
|
IMG_0390
Date: 04/10/2015
Views: 9312
|
|
|
IMG_0410
Date: 04/17/2015
Views: 11643
|
|
|
DSC00219
bracket installed
Date: 09/09/2015
Views: 12362
|
|
|
IMG_0340[1]
cloth cabinet installed.
Date: 09/04/2014
Views: 15754
|
|
|
Ipad 039
Concrete base for 20ft x 10ft shed
Date: 03/22/2014
Views: 8810
|
|
|
DSC00215
foam removed to make space for the rudder bracket
Date: 09/09/2015
Views: 10907
|
|